Fording Kit Dipstick Question

[ikoinu]

Quick question regarding the DWF kit.

Have most of the parts I've put together, but am uncertain on the specific oil tube & dipstick I need.
I have Dipstick 12339846 & Tube 12469130 but don't know if these are correct for my 6.2L?

It's been tough finding specific documentation for this and the transmission stick & tube numbers as they apply to the different engine/transmission configurations. Looking at the DWF instructions online (http://www.hummerknowledgebase.com/driving/dwf.html) with no configuration specification listed it shows dipstick 12339847 & tube 12339147-2.

Any ideas?

 

[86humv]

Your oil stick will work with that tube.
Tube is for a 400 amp installation, but will work.
Dipstick 12339847 & tube 12339147-2 are used with a 400 turbo trans.

 

[ikoinu]

Thanks 86humv for pointing that out, I was looking at the picture in reverse and had mixed up the transmission and oil sticks.
Thank you too for sending the package with those DWF parts, just got it. Looks good!


So you are confirming that Oil Dipstick 12339846 is for a 6.2 litre engine & Oil Tube 12469130 is also for a 6.2 litre engine but specific to allow the 400amp alternator to fit, but will work with that stick on a 60 or 200amp alternator configuration.

Do you know the specific part numbers of the transmission dipstick and tube that you sent me?

Only reason I ask is that I searched quite a bit and had difficulty coming up with the specific part numbers. Hopefully next time someone looks for this they can reference this thread.

 

[86humv]

The oil stick will fit 6.5 also
Trans tube is a 12339147-2.....stick 12339847

 

[ikoinu]

Thanks for clearing this up and helping me with putting my kit together.

If anyone is looking for the little parts to their deep water kit you can find them at
http://www.adventureaccessories.com.

 

[CallMeColt]

Dipstick 12339847 & tube 12339147-2 are used with a 400 turbo trans.

Stumbled on this & it confirmed what I was trying to figure out. Thanks!

 

[ikoinu]

Good luck with putting it together.
I put the parts & project aside a while back, but was just organizing the garage today and found all of them, and just saw you referenced 86humv's tip.

You have just inspired me to complete my installation!