-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
FRAG 7 Door Info
- Thread starter jake20
- Start date
Autonomy_Lost
Well-known member
- 687
- 1,537
- 93
- Location
- Pennsylvania
Might have some ITAR issues sharing this publicly. But I'm also interested 
- 4,414
- 4,209
- 113
- Location
- Brentwood, Calif
frag levels are confusing, but there aren’t any Frag 7 doors, its Either Frag 5 or standard threat…Frag 7 adds additional roof protection
spankybear
Well-known member
- 898
- 926
- 93
- Location
- WA
Frag 7 convertible?
spankybear
Well-known member
- 898
- 926
- 93
- Location
- WA
Yeah right... No ITAR issues. We wouldn't want to leave behind billions in military ITAR assets in some 3rd world conutry now would we.Might have some ITAR issues sharing this publicly. But I'm also interested
Autonomy_Lost
Well-known member
- 687
- 1,537
- 93
- Location
- Pennsylvania
The only people we can trust with our secrets is the Taliban and Ukraine, not us lowly citizens.
- 7,778
- 19,912
- 113
- Location
- Charlotte NC
.The only people we can trust with our secrets is the Taliban and Ukraine, not us lowly citizens.
Sad but True...
Thanks for clarifying that @Retiredwarhorses
To put it simply, I was looking at the door design on my deuce and it spawned an idea. Frag doors are pretty thick due to the armor, and I really don’t care for the armor, though it would be cool to have.
I’m poking the idea of a door that looks like the heavy roller window armored doors from the outside, but is upholstered and creature comfort friendly on the inside. If I can get the exterior dimensions, I can see how feasible it’d be. Last set of frag doors I saw was selling for 25K+… can’t be worse than that.
Regular X doors don’t look bad on a turbo truck but the frag look really completes the truck in my opinion. The other issue is that aftermarket x doors are all “decent” at best. My West Kentucky fiberglass doors work fine but could definitely use some cleaning up and better QC on some parts. Next doors I was planning on trying were Plan B’s signature series aluminum ones.
To put it simply, I was looking at the door design on my deuce and it spawned an idea. Frag doors are pretty thick due to the armor, and I really don’t care for the armor, though it would be cool to have.
I’m poking the idea of a door that looks like the heavy roller window armored doors from the outside, but is upholstered and creature comfort friendly on the inside. If I can get the exterior dimensions, I can see how feasible it’d be. Last set of frag doors I saw was selling for 25K+… can’t be worse than that.
Regular X doors don’t look bad on a turbo truck but the frag look really completes the truck in my opinion. The other issue is that aftermarket x doors are all “decent” at best. My West Kentucky fiberglass doors work fine but could definitely use some cleaning up and better QC on some parts. Next doors I was planning on trying were Plan B’s signature series aluminum ones.
Alright I found some outlines in a PDF, though they aren't the roller-window style, anyone lucky enough to have a set able to measure the height? I can probably extrapolate the rest, a flat piece of metal can't be that bad right? 
I attached images of 2 door sets, they're both slightly different in shape and contours. Anyone know the proper nomenclature for the differences between these two?
I attached images of 2 door sets, they're both slightly different in shape and contours. Anyone know the proper nomenclature for the differences between these two?
Attachments
- 4,414
- 4,209
- 113
- Location
- Brentwood, Calif
Standard threat and FRAG 5Alright I found some outlines in a PDF, though they aren't the roller-window style, anyone lucky enough to have a set able to measure the height? I can probably extrapolate the rest, a flat piece of metal can't be that bad right?
I attached images of 2 door sets, they're both slightly different in shape and contours. Anyone know the proper nomenclature for the differences between these two?
Oh I see what you mean I think, I'm assuming standard threat is the one without the supplemental armor plating around the doors and the less-curvy contour design? Searching through the TMs for "frag" is quite extensive heh
Given that the name is standard threat, does that mean they are included on all new humvees being delivered to the branches? I know that soft doors are no longer being made and I think x-doors are also being phased out of production, though don't quote me on that.
Trying to find the outline of the standard threat doors specifically, since they're a simpler design it seems. Plenty of references to them in the TMs, but no diagrams from a direct side view.
I did find a perfect side reference diagram, but they aren't the right doors. These seem to be an older revision armor setup for M1114s, quoted as " Objective Frag 5 Door and Frag 1A Kit " by the document
Trying to find the outline of the standard threat doors specifically, since they're a simpler design it seems. Plenty of references to them in the TMs, but no diagrams from a direct side view.
I did find a perfect side reference diagram, but they aren't the right doors. These seem to be an older revision armor setup for M1114s, quoted as " Objective Frag 5 Door and Frag 1A Kit " by the document
Attachments
Hummer Guy
Well-known member
- 843
- 807
- 93
- Location
- United States Louisiana
If you get the measurements, please let me know, and what's your plans for the thick windows?
The armored window frames don't seem to be tooooo sparse on the internet just yet, so just getting those NOS or used for now. I still haven't figured out how I want to go about the actual door and measurements for it yet, will see how picky I can be with regards to how accurate to the originals they are.
Definitely planning on going standard threat if anything though, simpler shape with less messing around. I'm still scrounging the interwebz to try and find more reference photos and at least some clear silhouettes of them. Plenty of things on my plate though so it'll go at whatever pace I have time for lol.
Definitely planning on going standard threat if anything though, simpler shape with less messing around. I'm still scrounging the interwebz to try and find more reference photos and at least some clear silhouettes of them. Plenty of things on my plate though so it'll go at whatever pace I have time for lol.
- 492
- 1,157
- 93
- Location
- AL
Not sure if these pics are of any value to you…..
WarWheels.Net- Detail Photos of the LTAS B-Kit FRAG 5 Door Armor on HMMWV
Detail Photos of the LTAS B-Kit FRAG 5 Door Armor on HMMWV courtesy of Chuck Aleshire.
warwheels.net
Haven’t come across these yet, that’s a really good shot of the interior mechanisms and seals. Thanks for looking out!
- 488
- 368
- 63
- Location
- California
Have you made progress on the Frag doors?
I am interested in fabricating a set also.
Not yet sadly, it’ll be a little bit before I get a chance to get to it in detail. I made a base outline in cad but some measurements didn’t add up and I didn’t like what it turned out as. It’s just a tedious process of trial and error is all.
My M1043A2 build is coming to a close with just needing paint (if only northern IL temps weren’t so inconvenient). The M1151 will get the spotlight afterwards, definitely a lot of plans in mind for that build.
- 488
- 368
- 63
- Location
- California
Thanks for the update! I was thinking to get my X-doors 3D scanned into CAD and start from there. The outline should be the same and was thinking to do a thick profile, however use some of the inner space to add power locks. I like the Frag 5 side rolling windows look, but I am told they have terrible visibility, especially for the side mirrors, which I can see why.