bones1
Member
- 854
- 4
- 18
- Location
- Southern Maryland
Anyone have a source for the large fuel line that comes out of the pump at the tank?. Looks like 1/2 or bigger steel line with a large inverted male fitting.So far can not find .
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
I discovered they are AN (Army-Navy) fittings. I bought a motor and was capping off everything to pressure wash and had stripped the motor down and wanted to cap off where the fuel line connected to the IP and the return line connected to the fuel filters. I have a lot of AN fittings from building sandrails an a -8 AN cap screwed right on.
not positive, but I bet all inverted flare fittings are AN.
http://www.gre6.com/ansize