Glovebox/cupholders for a 923

[goldneagle]

After owning a Deuce for several years I really missed the glove box that it had when I got my first 923. The box behind the seat is nice but not quite as handy. So I started looking around for one that might fit in the 5 ton. I found one made for a boat with 2 cupholders on Ebay that would work just fine. With a little bit of modification it worked so well in the wife's truck that I decided to put one in my 923. Only mod to the box was to notch the right side to clear the defroster duct. It took just a few minutes and my wife's nail polish remover (acetone) to glue the trimmed pieces. After installation I shortened the grab bar and moved it over slightly.

Do you happen to have any pictures of the dash opening before you installed the box into the hole?

 

[Andyrv6av8r]

Do you happen to have any pictures of the dash opening before you installed the box into the hole?

I didn't take any pictures but I'd be happy to take it out tomorrow and post some pics. It will take me just a couple of minutes.

 

[Andyrv6av8r]

Do you happen to have any pictures of the dash opening before you installed the box into the hole?

Here are the pictures:

 

[D3M0N]

This is an awesome modification. I never would have thought to do something like this.