• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Graves Mountain MV Trailrides and Rally, September 1-5, 2016

SCSG-G4

SCSG-G4

PSVB 3003
5,379
3,413
113
Location
Lexington, South Carolina
Just so those who want to pick at me can have a couple of weeks to get ready, I'm going to post the Range Rules here, in addition to having printed copies available at the Rally. My background is conducting High Power Rifle Matches, usually on Military Bases, so some of the terminology comes from that and a bit of it comes from conducting Bench Rest Shooting Matches (back in the 1970's). It looks better as an .RTF file than .TXT
 

Attachments

pmramsey

pmramsey

Active member
463
190
43
Location
VA
SCSG-G4 said:
Just so those who want to pick at me can have a couple of weeks to get ready, I'm going to post the Range Rules here, in addition to having printed copies available at the Rally. My background is conducting High Power Rifle Matches, usually on Military Bases, so some of the terminology comes from that and a bit of it comes from conducting Bench Rest Shooting Matches (back in the 1970's). It looks better as an .RTF file than .TXT
Click to expand...
My system will not allow me to open the file at all.

Suggestions?
 
Another Ahab

Another Ahab

Well-known member
18,007
4,579
113
Location
Alexandria, VA
SCSG-G4 said:
Just so those who want to pick at me can have a couple of weeks to get ready, I'm going to post the Range Rules here, in addition to having printed copies available at the Rally. My background is conducting High Power Rifle Matches, usually on Military Bases, so some of the terminology comes from that and a bit of it comes from conducting Bench Rest Shooting Matches (back in the 1970's). It looks better as an .RTF file than .TXT
Click to expand...
The only wrinkle that differs from any of our weapons training at MCB Quantico was the command "Targets" instead of "Commence Firing" (and immediately, up came the target butts).

Or that's the way I'm remembering it, but it was a good while back now. Thanks for the memory boost though, SCG-G4!
 
rickf

rickf

Well-known member
Steel Soldiers Supporter
3,169
1,743
113
Location
Pemberton, N.J.
Man, I have not seen that list in a long time but I was on Mike's firing line last year and he does a thoroughly professional job. By the way, in reference to the very first statement on the list.................. I am a experienced heavy equipment operator.rofl
 
SCSG-G4

SCSG-G4

PSVB 3003
5,379
3,413
113
Location
Lexington, South Carolina
rickf said:
Man, I have not seen that list in a long time but I was on Mike's firing line last year and he does a thoroughly professional job. By the way, in reference to the very first statement on the list.................. I am a experienced heavy equipment operator.rofl
Click to expand...
Rick,
I hope we do NOT have to call on your experience, but on the other hand I'm glad to know you are available!
 
C

CGarbee

Well-known member
2,473
562
113
Location
Raleigh, NC
Just a reminder that we are getting closer and closer to the event.
Registration fee goes up for registrations sent in (postmark) after August 22.

Advance (before August 22): Cost is $40 per person. Children 15 and under are $20 per person.
After August 22 or at the Gate: Cost is $50 per person. Children 15 and under are $25

Hope to see a bunch of you there.
 
Ford Mechanic

Ford Mechanic

Active member
1,805
7
38
Location
Edenton, NC
So I'm wanting to bring my atv. Is there a place that I can back the truck down into to help get it off? My ramps arn't long enough to get it in and out on flat ground. I can back it into a canal ditch to load it into here, other worse I'll have to drag my M105

Sent from my SM-G900V using Tapatalk
 
SCSG-G4

SCSG-G4

PSVB 3003
5,379
3,413
113
Location
Lexington, South Carolina
Ford Mechanic said:
So I'm wanting to bring my atv. Is there a place that I can back the truck down into to help get it off? My ramps arn't long enough to get it in and out on flat ground. I can back it into a canal ditch to load it into here, other worse I'll have to drag my M105

Sent from my SM-G900V using Tapatalk
Click to expand...
I can think of a few places at GM that you could back the truck straight up to and drive off of it up hill, without the truck ever being in a ditch!
 
C

CGarbee

Well-known member
2,473
562
113
Location
Raleigh, NC
Ford Mechanic said:
So I'm wanting to bring my atv. Is there a place that I can back the truck down into to help get it off? My ramps arn't long enough to get it in and out on flat ground. I can back it into a canal ditch to load it into here, other worse I'll have to drag my M105

Sent from my SM-G900V using Tapatalk
Click to expand...
We have a several of locations, including a couple of loading docks. :)
Loading docks that are located at the Cannery and Packing Shed are both good locations, as are a couple bank ramps in the orchard. I also have the steel ramps that I use to load a M274-A5 in my XM813 on site...
 
rickf

rickf

Well-known member
Steel Soldiers Supporter
3,169
1,743
113
Location
Pemberton, N.J.
Fair warning, The back gate guard, (me) will use racing atv's that dust out his camp site for target practice!!!:twisted:
 
rickf

rickf

Well-known member
Steel Soldiers Supporter
3,169
1,743
113
Location
Pemberton, N.J.
Hey Ferro, Got all the screws in the distributor cap? Brakes are highly over rated, use the guys brakes in front of you. ( I will be dang sure to stay behind you now. )rofl
 
C

CGarbee

Well-known member
2,473
562
113
Location
Raleigh, NC
As a reminder: DO NOT drive through the field with the folks who are camping with horses. There are folks who have horses that do not do well with the whine of turbos, diesel smoke, etc (heck, some of them get skittish walking past the hog pen over by the barnyard).
We will, as always, be entering the camping field from the back: using either the orchard entrance (by RickF's campsite) or by the Trout Pond.
I will be putting up the directional signs up on RT670 and RT643 (thanks once again, Mike SCSG-G4) early Thursday morning that route you to the Trout Pond entrance on RT 643 (entrance is at the intersection of Bohannon Road and RT643).
 
You must log in or register to reply here.
111,221members
165,495threads
2,329,044posts
1,347online users
Top
✖
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks