Grease preference

[OrneryOrr]

I know I'll get a bunch of different answers but before I start squirting grease into the many grease points on my 923, which grease do you all think is the best stuff to use? I use the green waterproof stuff for my boat trailer wheel bearings but not sure if that would be sufficient for this fine specimen of mechanical engineering.

 

[Scar59]

Start greasing.... any quality grease will work. Don't over think it.

 

[topo]

My go to grease it's easy to get always the same color ,
When working on brakes and topping off the wheel bearings with grease I know this grease is already in there and I'm not mixing it with what I bought last time .

 

[royalflush55]

Some quality grease is always better than no grease. I see way too much used farm machinery that has never been greased and it is a chore to clean it out so it will take grease. Grease seals out water and dust as well as lubricate. Grease is cheap imho.

 

[royalflush55]

My go to grease it's easy to get always the same color ,
When working on brakes and topping off the wheel bearings with grease I know this grease is already in there and I'm not mixing it with what I bought last time .

I agree. Do not mix grease if you know what is in there!

 

[frank8003]

Does the TM direct one to use GAA?

 

[Elijah95]

I agree. Do not mix grease if you know what is in there!

Yeah the only way I feel comfortable mixing is if I flush until the brand new comes out, then I run it, and flush again