Help Identify this Gator bed

[Ras1]

Hi, I need help identifying this gator bed. Is it an A3? or A2? has 2 black metal "locks" that I think hold the tailgate flat when folded down.

Also, once it is identified, I need a picture of how the hinge mounts to the frame, and where the hoist cyl. attaches, as both appear to be different than an m gator or m gator a1.

Thanks!
Dave

 

[nickd]

It looks different than mine. Mine has a square tubular bracket that pivots out horizontally supporting the tailgate from underneath. The hinges to mount the tailgate to the frame are under the bed even with the the tailgate. On the underside of the bed you will find a bracket with a hole in it where the end of the piston attaches to the bed. There is a corresponding bracket for the other end of the piston on the frame.

 

[wheelspinner]

It looks different than mine. Mine has a square tubular bracket that pivots out horizontally supporting the tailgate from underneath. The hinges to mount the tailgate to the frame are under the bed even with the the tailgate. On the underside of the bed you will find a bracket with a hole in it where the end of the piston attaches to the bed. There is a corresponding bracket for the other end of the piston on the frame.

Mine is exactly as you describe.

 

[Lionel]

Looks like a later A2 to me.

 

[Ras1]

I got the box figured out. It is an M-Gator A3 bed. the lift cyl. bracket and the hinges are in the location for the a3. (like the new xuv 825i)

 

[Ras1]

Gator Beds ?

 

[Bartwoody]

Selling any?