Help me identify a missing component in Mep 831a

[bill_jackson]

After looking through the tm I am unsure of what component is missing. The red alligator clip is powering the
fuel pump. Generator starts and runs smoothly. The bundle of white wires obviously need to be connected to something. I
am not sure to what though.
Thanks for your help

 

[kloppk]

What you are missing is the Contactor. It's a high current relay that sends power from the inverter to the output lugs.
The the item with the blue sticker on it below.
Be careful. Some of those disconnected wires have 120 and/or 240 volts on them!

 

[bill_jackson]

Thank you. I really appreciate your help. I am off to source a contact. Is there a brand or provider that you would recommend ?

 

[DieselAddict]

Search eBay for ct100d24c1s and you'll find it.

 

[bill_jackson]

Perfect. I have placed an order. Thanks again for all of your help

 

[bill_jackson]

The contactor has been delivered. The larger gauge wires are labeled, so I have been able to wire them correctly. The smaller wires with spade type connectors are not labeled. What is the best way to identify each of the smaller wires and their corresponding location on the contactor?

 

[kloppk]

All the wires in the generator labeled. It's stenciled on the insulation every so often. You may need to cut a wire tie or two to be able to find it.