• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Hitch Spacer for M923

gijoel

Member
41
11
8
Location
San Bernardino, CA
I ordered a Curt Manufacturing 14082 Class IV Receiver for my M923 truck. I had to remove the pintle hook as to make it fit. I am finding out I am still high by about 12" with the receiver as to hook up my 30' Toy Hauler. I thought about purchasing a drop hitch but based on weight and some other factors, I don't thing this would be safe (even at 10000 I could possibly bend the trailer ball mount). My thought was to mount 8" spacers made of 2x4x.25 wall thickness rectangular structure tubing. I would mount the spacer to the frame and then the hitch to the spacers. I plan to use 1/2-13 grade 9 bolts to fasten it all together. This 8" spacer would drop the hitch down enough to hitch the toy hauler. (3" drop with trailer ball mount).

My question is; do any of you see a problem with this? I performed some calculations (yes, I am an engineer but have not practice engineering for about 10 years) and found it to be okay.

Any help would greatly be appreciated! I need to have this hitch problem resolved asap.

Thanks
JB / San Bernardino, CA
 

350TacoZilla

Member
263
0
16
Location
Hancock MD
Some of the larger weight distribution hitches actually have a good size drop to them and are rated high enough. I dont see a problem with the spacer approach but it might be better to just use the right size drop hitch as long as it also has the tow rating you need.

there are quite a few drop hitches rated for the 10,000lbs your talking about.

http://www.etrailer.com/Ball-Mounts/Convert-A-Ball/AMSC12.html


http://www.autoanything.com/towing/trimax-aluminum-adjustable-ball-mount-hitch

this one claims 15K http://www.ebay.com/itm/WEIGHT-DISTRIBUTION-SHANK-15K-GTW-1-5K-TW-14-LENGTH-EXTRA-DROP-/400294724347
 

gijoel

Member
41
11
8
Location
San Bernardino, CA
Thanks for the information. I will be posting of what I did to one of the 10K hitches... I bent it and bent it good. I am fabricating the spacers now and will be posting them shortly, as with them installed on the truck.
 

Artisan

Well-known member
2,761
227
63
Location
CDA Idaho
I will sell ya one of my kits... CLICK HERE If interested PM me. I designed this in CAD. It is ROCK solid. The cross bar that you buy that I do not sell Is rated at 16K I am close to you here in Monrovia.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks