• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

HMMWV Glow Plug Condition?

WAGNUM

Member
78
4
8
Location
Tigard, Oregon
Replaced my glow plugs today. 4 were swollen, managed to get them out with vice grips and a flat head. I don't know how old these glow plugs were but I was getting long cold starts with a lot of white smoke. Any thoughts / comments on how these look? Do these reveal any issues with my 6.5 n/a?
IMG_1986.jpgIMG_1987.jpgIMG_1988.jpg

- WAGS
 

86humv

Well-known member
Steel Soldiers Supporter
1,704
503
113
Location
Texas
Check them with an Ohm meter....if nothing....there bad....if 000, there bad
If around 1.3 or above ohms....good, but most in your pic look bad.
I have new ones if needed.
 

TNriverjet

Active member
Steel Soldiers Supporter
1,172
24
38
Location
Clifton, TN
It's a good thing you got them out of there Wagnum! Some folks have had much more trouble than you did.
 

WAGNUM

Member
78
4
8
Location
Tigard, Oregon
It's a good thing you got them out of there Wagnum! Some folks have had much more trouble than you did.
Yeah I lucked out. Can you tell how a diesel engine is running by looking at its glow plugs, in the same way you can tell how a gas engine is running by looking at the spark plugs? If so, does anyone see anything I should be concerned about with my 6.5na motor?

Appreciate the help -Wags
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks