• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

How to wire electric brake controller

svlsmokey

Member
66
1
6
Location
N/E Calif.
Not finding anything searching for this so maybe you can point me in the right direction or give some guidance on how to wire up the under-dash part of an electric brake controller for standard 7-pin connector. Thanks all.
 

Warthog

Moderator
Super Moderator
Steel Soldiers Supporter
13,774
232
63
Location
OKC, OK
Same as a civilian truck. Tap into the brake light wire. The brake switch and lights are all 12v.
 
Last edited:

JJP

New member
23
0
1
Location
Erie, PA
If your looking for basic install how to Try Etrailer.com. They have quite a few how to videos. I used some information from them for mine on a 76 chevy. They had a video on installing one in an older chevy.
 

Swamp Rooster

New member
29
0
0
Location
Hayward WI
When you run your wire to the battery just make sure it is not where it doubles up or your brakes will just stay on and eventually the controller will burn up... Swamp Rooster.
 
Top