• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Jack for 1985 CUCV 1009

Riverhawk

New member
20
11
3
Location
West Unity, NH
I'm searching for a jack for my CUCV 1009. I have one for a 1008 that is a little different. The one I have mounts in the right rear of the truck, while the 1009 one is a little smaller in diameter, does not have the mounting hole in the base plate, and mounts under the passenger seat. Looking for outright purchase or even trade for the one I have.
 

Riverhawk

New member
20
11
3
Location
West Unity, NH
Thanks for your comments and pictures, Ziggy. My jack looks exactly like yours, but the paperwork I've got I interpreted differently. Of course they are just drawings, but I don't see the hole on the 1009 drawing that I do on the "all except" one.. The picture of the jack I'm sending has the hold down bracket and it appears to go on a smaller barrel. Could be it's just bent. I assumed that since the GVW of the 1009 is less than the others it might have a smaller jack. I believe you've saved me a bunch of try to find it time. I appreciate your interest and help.
 

Attachments

ZiggyO

Well-known member
Steel Soldiers Supporter
638
520
93
Location
Nebraska
I think that hold down you have is not correct-- the correct hold down should have more of a curve to it, not a sharp peak. As for the line drawings, I ran in to that many times in various tm's--- that is why I referred to the p/n (nsn) and the UOC codes.

Z
 
Top