Jack for 1985 CUCV 1009

[Riverhawk]

I'm searching for a jack for my CUCV 1009. I have one for a 1008 that is a little different. The one I have mounts in the right rear of the truck, while the 1009 one is a little smaller in diameter, does not have the mounting hole in the base plate, and mounts under the passenger seat. Looking for outright purchase or even trade for the one I have.

 

[ZiggyO]

pm sent

 

[ZiggyO]

Here is a pic of the correct military jack for the cucv series...... Per the -10, the same jack is used between all models of the cucv. They all have the base plat hole.

 

[Riverhawk]

Thanks for your comments and pictures, Ziggy. My jack looks exactly like yours, but the paperwork I've got I interpreted differently. Of course they are just drawings, but I don't see the hole on the 1009 drawing that I do on the "all except" one.. The picture of the jack I'm sending has the hold down bracket and it appears to go on a smaller barrel. Could be it's just bent. I assumed that since the GVW of the 1009 is less than the others it might have a smaller jack. I believe you've saved me a bunch of try to find it time. I appreciate your interest and help.

 

[ZiggyO]

I think that hold down you have is not correct-- the correct hold down should have more of a curve to it, not a sharp peak. As for the line drawings, I ran in to that many times in various tm's--- that is why I referred to the p/n (nsn) and the UOC codes.

Z

 

[Riverhawk]

Yes, sir.