Bobert
Member
- 472
- 9
- 18
- Location
- Des Moines/ Iowa
I found another antenna mount that I forgot I had the other day and decided to put it on. I thought I would share my method of removing the jack nuts that hold it on. The first time I did it I cut it off but this time I got them out and reused them.
1. Break it loose with an impact wrench.
2. If it just spins, wedge a screwdriver in there and spin it.
3. As it pulls out wedge something bigger until you can pry on it.
It is a lot easier than a sawzall. Does anybody else have any tricks on these?
1. Break it loose with an impact wrench.
2. If it just spins, wedge a screwdriver in there and spin it.
3. As it pulls out wedge something bigger until you can pry on it.
It is a lot easier than a sawzall. Does anybody else have any tricks on these?
Attachments
-
24.2 KB Views: 58
-
32.7 KB Views: 63
-
83 KB Views: 66
-
38.8 KB Views: 68
-
53.8 KB Views: 71
-
39.7 KB Views: 70
-
15.9 KB Views: 68