• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

K&N Air filter setup

hirollin87

Member
Steel Soldiers Supporter
67
9
8
Location
Raymond MS
Can someone help me find the post where someone has a K&N plumbed under the hood of an A2 truck? I saw it somewhere on here but can not seem to find it anymore. Thanks
 

VPed

Well-known member
Steel Soldiers Supporter
1,109
307
83
Location
Clint, TX
AFE sells dry reusable high flow filters that are much better at stopping dirt than the oiled K&Ns.
 

Ddmk18

Member
272
2
18
Location
James Creek PA
Yes because I added a 25 gallon hydraulic tank where the original filter was and plumbed it around the tank to retain the original air stack. image.jpg
 

Ddmk18

Member
272
2
18
Location
James Creek PA
Ok the filter I used was K&N 38-2006S. It has 6 inch inlet I used a 5 to 6 inch coupler then it has a 5 inch outlet which I ran 5 inch the whole way into the turbo. As far as air restriction goes I never hooked up the original gauge again. I know it had to be better because I had her turned up pretty good and the egts where lower with that filter setup than with the factory filter. More air in = lower egts.
 
Last edited:
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks