la rally swap and trade

[timntrucks]

75.00 for all three

 

[juanprado]

75.00 for all three

If Zev only needs 2, I will take one as I have a "lonely" one

Is it the single chain one like I borrowed a few years ago?

 

[goldneagle]

75.00 for all three

I'll take them. PM sent.

 

[timntrucks]

yes singled ones

 

[goldneagle]

yes singled ones

That is fine. I still want them. Already talked to Juan about them.

 

[goldneagle]

I have two 12' lengths of 2/0 jumper cable wire with crimped terminal ends on both ends. They are from a Nato jumper cable that I upgraded to 30' long. In great shape for $60 for the pair.

 

[WILDBOY6X6]

I need a tail gate & front bed panel with head board slats for a M756A2 (they only fit m756a2) I also need a ID plate for my M34 the one with the serial # on it.

thanks
Steve

 

[goldneagle]

I need a tail gate & front bed panel with head board slats for a M756A2 (they only fit m756a2) I also need a ID plate for my M34 the one with the serial # on it.

thanks
Steve

This might be way out there but you do realize we are talking about LA= Louisiana not Los Angeles , CA.

 

[frodobaggins]

I have a springer seat out of a 5 ton. Possibly some 11.00-20 on 5 ton rims )if I get them off my M820 on time. I also have a 5 ton soft top frame kit. Old Deuce driver seal with bench seat attached. Pioneer rack. Window cranks and hardware. Used glass from a Deuce door. (1 has a good frame around it) 5 ton CAMO soft top missing the front strip.

Gimme a price on that glass. I need one for my drivers side

Have 5-6 complete AS-3900 antennas and a few bases, brand new freightliner work lights that come with the M915/916. I am also looking for a good condition 1100R20 NDT on a deuce rim.

May be interested in an antenna and base.

 

[goldneagle]

Gimme a price on that glass. I need one for my drivers side



May be interested in an antenna and base.

$20.00 I'll bring both so we can make sure you get the right one.

 

[WhitePhoenix]

Got a GMTK ill be bring if anyone is interested, asking $350 for it and open to offers on it.

 

[timntrucks]

nice looking tool kit how much you are asking

 

[Csm Davis]

Okay I will be taking orders for stuff to bring to the rally if I need to bring a full 18 wheeler I can I have most anything on a 939 that you may need and a few 809 and m35 parts, lots of wrecker bii and bits. Rally special 300 feet of hemp rope 9/16 I think 100.00 other sizes available call me before the rally.

 

[kawkev]

Okay I will be taking orders for stuff to bring to the rally if I need to bring a full 18 wheeler I can I have most anything on a 939 that you may need and a few 809 and m35 parts, lots of wrecker bii and bits. Rally special 300 feet of hemp rope 9/16 I think 100.00 other sizes available call me before the rally.

Got any nylon or poly twisted rope in black or OD? Need some for my M105/M101 trailer tarps. I need to come by for a visit sometime. What M35 parts you got available?

 

[goldneagle]

I have a complete bench seat out of my M820A2 available. $50 gets it. Stainless steel fuel tank and support brackets from M939 for $200. M35 or M818 series windshield frame (outer frame) for $50. M840 dolly set (trailer) for $475 with title or $375 with Bill of Sale only. Onan RV generator 3000 watts gasoline fueled for $875. More to come. Heavy items will only be transported to rally if I have a buyer before hand.

 

[m109a2]

Never did like plastic battery box What do you need for it,I will be there thursday to help out.My first rally can not wait Al

 

[hambone]

Is this show mainly for big trucks? I own several M151's, M715 and M211. I need a tailgate for my M715, I know its a longshot, my great grandparents were strawberry farmers in Ponchatoula, still have relatives there. Thanks, Hambone

 

[timntrucks]

dont see many 715 but one comes every year. i think he has a parts truck. ill check for you

 

[timntrucks]

ill take 30.00 for the battery box

 

[m109a2]

30.00 sounds good to me.Al