trades2much
Member
- 44
- 0
- 6
- Location
- albany, oregon
Sorry guys I haven't posted any new pics for a while so here ya go..
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
latest progress Custom V-150
- Thread starter trades2much
- Start date
trades2much
Member
- 44
- 0
- 6
- Location
- albany, oregon
some more..
Attachments
trades2much
Member
- 44
- 0
- 6
- Location
- albany, oregon
and some more!!
And some more!!
And some more!!
Attachments
alphadeltaromeo
Active member
- 1,901
- 3
- 38
- Location
- Alto, GA
Very nice! You're doing a great job with fabrication.
trades2much
Member
- 44
- 0
- 6
- Location
- albany, oregon
new light mounting
mounts I fabbed for tomar red/blue strobes and LED headlights
mounts I fabbed for tomar red/blue strobes and LED headlights
Attachments
trades2much
Member
- 44
- 0
- 6
- Location
- albany, oregon
turret and gun port work
mock up and fab of sniper port, first mocked with aluminum then fabbed with armor. I couldn't resist the teeth!!! door linkage not done yet. Remington 700 stock with a fake barrel and scope I mocked up for clearance testing.
mock up and fab of sniper port, first mocked with aluminum then fabbed with armor. I couldn't resist the teeth!!! door linkage not done yet. Remington 700 stock with a fake barrel and scope I mocked up for clearance testing.
Attachments
trades2much
Member
- 44
- 0
- 6
- Location
- albany, oregon
Teeth!!!! upper and lower door will be opened via actuator inside
Attachments
- 8,539
- 2,758
- 113
- Location
- Monrovia, Ca.
Looks good! Did you use an ISB or QSB?
trades2much
Member
- 44
- 0
- 6
- Location
- albany, oregon
Johnny #5 is watching me!!!
Hey Gerald... I just realized Johnny #5 is watching me weld in this photo!!! I have a friend who's childhood favorite movie was short-circuit so he has officially named the M5 Thermal unit "Johnny #5". and pointed it out in the photo!! too funny!
Hey Gerald... I just realized Johnny #5 is watching me weld in this photo!!! I have a friend who's childhood favorite movie was short-circuit so he has officially named the M5 Thermal unit "Johnny #5". and pointed it out in the photo!! too funny!
trades2much
Member
- 44
- 0
- 6
- Location
- albany, oregon
oop's, this pic
Attachments
trades2much
Member
- 44
- 0
- 6
- Location
- albany, oregon
ISB 5.9 24v
trades2much
Member
- 44
- 0
- 6
- Location
- albany, oregon
Thankyou Alpha.
trades2much
Member
- 44
- 0
- 6
- Location
- albany, oregon
test drive
Took her out for a spin... Hauls A**!!! The Cummins 5.9 was DEFINATELY a great choice for power!!!
Took her out for a spin... Hauls A**!!! The Cummins 5.9 was DEFINATELY a great choice for power!!!
trades2much
Member
- 44
- 0
- 6
- Location
- albany, oregon
gun port
this is the general idea, after paint I will have my Dad who is an artist paint it to resemble a shark!!! Chomp Chomp tweekers!!!
this is the general idea, after paint I will have my Dad who is an artist paint it to resemble a shark!!! Chomp Chomp tweekers!!!
Attachments
wgtactical
Well-known member
- 674
- 316
- 63
- Location
- Carrollton, Georgia
Great job there Robert...sure would be nice if you were on this side of the country!
mbarber84
New member
- 137
- 1
- 0
- Location
- Pittsburgh / Pennsylvania
Awesome!
Glad to see you used the Cummins ISB for the powerplant, that`s DEFINITELY a good choice!
Cant wait to see the end result, I`m already jealous
Glad to see you used the Cummins ISB for the powerplant, that`s DEFINITELY a good choice!
Cant wait to see the end result, I`m already jealous
hardride
New member
- 22
- 0
- 0
- Location
- Ventura CA
engine compartment mod
How much more space was needed in the engine compartment to fit the 5.9?
trades2much
Member
- 44
- 0
- 6
- Location
- albany, oregon
The 5.9 was about 3 inches longer, since the rig will not swim again I chose to relocate the radiator and box it in the rear which gave me more than enough room. Also I chose to keep the motor mounts symetrical so I opened up the wheel-well and box in a motormount there, otherwise the 5.9 fit like it should have been there originally!
wgtactical
Well-known member
- 674
- 316
- 63
- Location
- Carrollton, Georgia
Robert I dont believe you are the one doing all that fab work Tell you what...if you were to come down here and do mine the same way, I will gladly admit I was wrong
Tell you what...if you were to come down here and do mine the same way, I will gladly admit I was wrong
trades2much
Member
- 44
- 0
- 6
- Location
- albany, oregon
Yeah Gerald sometimes even I can't believe I'm doing all this work!!! I think You need to open up a shop on this end of the map then I can come supervise for you!!! Thank's Gerald, call me when you get a breather.