-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Length of Ring Mount Legs?
- Thread starter renovate7
- Start date
dmetalmiki
Well-known member
- 5,523
- 2,028
- 113
- Location
- London England
I had the ring but no legs. So we simply made legs out of scaffold poles. and mounted the ring at what looked a nice hieght. Remember the legs extend way down the back of the cab, so leave at a length that you can adjust to your preferences at any time in the future..
- 2,186
- 86
- 48
- Location
- Zimmerman MN
Are they the same length as 5 ton legs?
- 7,744
- 154
- 63
- Location
- Columbus Georgia
The rear cab legs on mine are 55 1/4 inches long - the right front leg is 62 3/4 long is this helps.
Zout thanks for the info. Is that measured from the top of the arm or the bottom? I've got a set of legs that came off a non deuce vehicle. Two are 49" to the bottom of the arm, 54 1/2" to the top. The third is 57" to the bottom, 62 to the top. I'm trying to make sure they will work on a Deuce. I have them in the classified's here and don't want to sell something that's wrong.
- 7,744
- 154
- 63
- Location
- Columbus Georgia
That is from bottom of the tube to the top of the tube itself.
I do have extra room on the bottoms of each - but I would not go much shorter because you also have the interior brace for support to contend with. But also realize mine did not come with the ring and legs - it was part of a trade and I just made it all work and fabbed some of it together - Ron with his wrecker came down on a Sat and helped with the "lift" - all hail RON - worked perfect.
I do have extra room on the bottoms of each - but I would not go much shorter because you also have the interior brace for support to contend with. But also realize mine did not come with the ring and legs - it was part of a trade and I just made it all work and fabbed some of it together - Ron with his wrecker came down on a Sat and helped with the "lift" - all hail RON - worked perfect.