MidnightDuramax
Member
- 461
- 6
- 18
- Location
- Sandyston, NJ
Overdrive can you post a picture of the bracket?
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
LMTV Air Conditioner
- Thread starter dporter110
- Start date
TM has illustrations of that part
MidnightDuramax
Member
- 461
- 6
- 18
- Location
- Sandyston, NJ
Thats great. I asked for a pic from overdrive not a comment from you. You seem to have a comment about everything I post lately since I our trading of PM over the interior units. If he doesn't want to post a pic thats fine.
- 5,637
- 381
- 83
- Location
- Spring Branch, TX
Which TM and, if possible, which page? I looked through the -20, -20P, and the -34 and couldn't find it. I don't have access to a -34P so couldn't check there.
turnkey
New member
- 757
- 2
- 0
- Location
- wadsworth,ill
WOW hey boys play nice...???????
DrillerSurplus
New member
- 443
- 7
- 0
- Location
- Salt Lake City. UT
The LMTV manuals are on the SS site @ http://www.steelsoldiers.com/showthread.php?118919-M1078-TM-s
I assume you were referring to the 24P TM, I don't think there is a 34P.
I assume you were referring to the 24P TM, I don't think there is a 34P.
- 5,637
- 381
- 83
- Location
- Spring Branch, TX
I said I looked in the -20, -20P, and -34. If there's no -34P then thats probably why I don't have access to it. The thing is, the only reference to AC parts I can find is for the M1079 box AC unit. Thats why I asked for the specific TM and page number.
DrillerSurplus
New member
- 443
- 7
- 0
- Location
- Salt Lake City. UT
I agree it would be great if he posts the specific information. I was only trying to be helpful in making sure you had the link to the TM's here on SS which I believe is the complete set.
I appear to have stepped into some p!$$ing match here that I wasn't aware of, so over & out.
I appear to have stepped into some p!$$ing match here that I wasn't aware of, so over & out.
- 5,637
- 381
- 83
- Location
- Spring Branch, TX
Not on my part. Sorry if it came across like that. I do have all the TMs that are posted here downloaded and just can't find the information in it. I'd be surprised if there wasn't a -34P though. It may not be released for general distribution yet as to the reason it's not here.
- 10,458
- 6,530
- 113
- Location
- Camp Wood/LC, TX
Here is the drivers side bracket we seem to be getting wrapped around the axle about. Guys, this is the biggest mystery facing FMTV-dom, so lets work together to get cool air! I had posted this in another thread. The bracket is not the only thing needed (by far) to make the interior console work.
Attachments
- 5,637
- 381
- 83
- Location
- Spring Branch, TX
Beyond the inside evaporator unit and the bracket we'll need a condenser (which I'm guessing can be an aftermarket one of the appropriate volume capacity), the compressor, belt and hoses. And of course, a truck (for those of us still on the sidelines in that regard). Has anyone id'd the compressor yet? I have the advantage of living close to the Vintage Air factory in San Antonio so if I get the truck and bracket I may be able to get them to figure the condenser and hoses part. That would just leave me minus the correct compressor.
I just SMH when I read something like that.
Overdrive is working on a complete Kit, so if you fellas hang tight you'll save yourself a lot of work.
I guess, you could also buy the separate parts for more money, but why would you.
Last edited:
DrillerSurplus
New member
- 443
- 7
- 0
- Location
- Salt Lake City. UT
Thanks for clearing that up! I had just posted a quick reply to you without reading the recent posts & I misinterpreted your reply in light of some of the previous posts.
A while ago I had done a little homework digging through the TM's for AC in the LMTV cab with same result of finding just the M1079 box air. But there were over 250 hits for "bracket" when Adobe searched the 24P and I didn't make it through all of them. I thought there might be more information in the TM's for the LMTV A1 versions, but those seem to be in the new IETM format and not available to the public. PS magazine mentions IETM 9-2320-391-14&P several times, but I haven't found it out on the web.
It would be great if overdrive comes up with a complete kit.
scottmandu
Active member
- 822
- 36
- 28
- Location
- Texas
The only FMTV TM to have the Air conditioning brackets are the A1P2 TM's (and yes it's in the electronic ietm format), which has a C7 engine. Will your bracket fit a 3116?
scottmandu
Active member
- 822
- 36
- 28
- Location
- Texas
- 10,458
- 6,530
- 113
- Location
- Camp Wood/LC, TX
Thanks for posting this Scott. Is this from the A1P1 TM? Item 15 from the illustration is available, and it appears to fit the 3116 (see my earlier post with pictures).
scottmandu
Active member
- 822
- 36
- 28
- Location
- Texas
I believe it's from the A1P2 TM it's also in the LTAS TM. Thanks for the fitment pics on the 3116. Any line on item 12 the other bracket?
- 10,458
- 6,530
- 113
- Location
- Camp Wood/LC, TX
Nope. Totally shooting in the dark trying to fit this together since I do not have access to the electronic A1P1 or A1P2 TMs. Since many 3116 trucks got the A/C when they got the hard cabs, I suspect the parts in your diagram will work on the soft cab. If you have the TM page that gives the P/Ns from the legend numbers, please post it!
- 5,637
- 381
- 83
- Location
- Spring Branch, TX
NDT clean out your PM box.
Overdrive
Active member
- 411
- 96
- 28
- Location
- Wentzville, Missouri
OK we figured out both of the main brackets.
I didn't want to post a reply up due to covert auction activities. The sharks were out in full force on GL last week but we managed to win some at auction. I have the base bracket that bolts to the block and I hope the ones we just won are the other required. Once picked up from GL will post up pics and part numbers.
The hoarders on GL are terrible people and a 1000 curses on you
I didn't want to post a reply up due to covert auction activities. The sharks were out in full force on GL last week but we managed to win some at auction. I have the base bracket that bolts to the block and I hope the ones we just won are the other required. Once picked up from GL will post up pics and part numbers.
The hoarders on GL are terrible people and a 1000 curses on you