kenet3621
Member
- 179
- 4
- 18
- Location
- Blythewood SC
I completed the 110 volt to RV connector and wiring so I can have electrical hookup at RV parks or just about anywhere else.
I used a 25' 30 amp RV cable with handles (from Amazon) and cut the end off.
I then wired it into an Amphenol MS90556C44412P connector (eBay for $99). I don't think I need 3 phase power for my needs so I did not connect all the Amphenol pins.
![Van Connector completed.jpg Van Connector completed.jpg](https://www.steelsoldiers.com/data/attachments/409/409793-636137d16cfafeebaa6ac2db4633eb4d.jpg)
The completed hookup including an adapter for regular 3 prong outlet.
![Van to RV plug (5).jpg Van to RV plug (5).jpg](https://www.steelsoldiers.com/data/attachments/409/409797-3044ff0d36e5da4a3a38a1b166bab06b.jpg)
![Van to RV plug (2).jpg Van to RV plug (2).jpg](https://www.steelsoldiers.com/data/attachments/409/409794-4a78ea4e17786d0cf21923d2a58cfa32.jpg)
Connector attached to van plug.
![IMAG1462.jpg IMAG1462.jpg](https://www.steelsoldiers.com/data/attachments/409/409825-2c9f61f53967813a12176016ef42fa85.jpg)
I used an eight foot piece of welding cable for the ground strap.
I was able to make coffee in the van for the first time this morning!
Next will be replacing the fluorescent bulbs (or maybe take down the fixtures and install LED lights).
I used a 25' 30 amp RV cable with handles (from Amazon) and cut the end off.
I then wired it into an Amphenol MS90556C44412P connector (eBay for $99). I don't think I need 3 phase power for my needs so I did not connect all the Amphenol pins.
![Van Connector completed.jpg Van Connector completed.jpg](https://www.steelsoldiers.com/data/attachments/409/409793-636137d16cfafeebaa6ac2db4633eb4d.jpg)
The completed hookup including an adapter for regular 3 prong outlet.
![Van to RV plug (5).jpg Van to RV plug (5).jpg](https://www.steelsoldiers.com/data/attachments/409/409797-3044ff0d36e5da4a3a38a1b166bab06b.jpg)
![Van to RV plug (2).jpg Van to RV plug (2).jpg](https://www.steelsoldiers.com/data/attachments/409/409794-4a78ea4e17786d0cf21923d2a58cfa32.jpg)
Connector attached to van plug.
![Van Connector completed (2).jpg Van Connector completed (2).jpg](https://www.steelsoldiers.com/data/attachments/409/409795-a9797d7397605328d754390c2f976a37.jpg)
![IMAG1462.jpg IMAG1462.jpg](https://www.steelsoldiers.com/data/attachments/409/409825-2c9f61f53967813a12176016ef42fa85.jpg)
I used an eight foot piece of welding cable for the ground strap.
I was able to make coffee in the van for the first time this morning!
Next will be replacing the fluorescent bulbs (or maybe take down the fixtures and install LED lights).
Last edited: