infidel got me
Well-known member
- 1,679
- 32
- 48
- Location
- Newberry, Florida
lmtv vs 5 ton
5 ton for me.
5 ton for me.
Last edited:
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
LMTV vs 5 TON
- Thread starter bigbe5678
- Start date
I have a few lmtvs like how solid the M939's are compared to the LMTV cat motor is great but too much civi parts there and not built as well. Example. A LMTV muffler rusted out where the exhaust end pipe meets the muffler. The hot exhaust blowing against the frame rail melted the air lines while driving and left me on the side of the road. I installed a shield there now but stuff like this dosent happen on a M939
Mercunimog404
Banned
- 352
- 0
- 0
- Location
- Carson City/Nevada
I got spent years in a maintenance company. I'll disagree. Along with all the full time mechanics. They like the lmtvs over the 900 series. They are very reliable. I've put 1000s of miles convoying in them and yet have seen one break. Have seen 900 series trucks break down or fail to start though.
- 6,860
- 693
- 113
- Location
- Stratford/Connecticut
LMTVs are geared for the tires on them. The m939 trucks are geared for duals. If you need pulling power the lmtv has significantly more than a m939 truck with singles on it.
- 4,288
- 1,772
- 113
- Location
- Edmond, Oklahoma
I do not dought you for a second
A lot of guys love them and have good luck with them
Just relaying what was said and my opinion of them.
- 4,288
- 1,772
- 113
- Location
- Edmond, Oklahoma
I think the best of both worlds is the US Marine's 7 ton
The Navy uses it also so I've read
Now that thing is a beast!
The Navy uses it also so I've read
Now that thing is a beast!
Greasepatchworker
New member
- 3
- 0
- 0
- Location
- Fort St John BC
I'm from Canada as well and wondering about getting them across the border and insuring them and do you need a class 3 drivers for them. There is a guy here in BC that has 6x6's but he wants huge money for old A1 units that have the old naturally asspirated 250 Cummins. Was also thinkijng about the M1078 if I need a class 3 for the M923 or M1083
BenRoberts
Certified insane
- 1,367
- 208
- 63
- Location
- southwest/ohio
Would love to have a mk23
snowtrac nome
Well-known member
- 1,674
- 138
- 63
- Location
- western alaska
as a retired army mechanic I have driven and worked on both the 5 ton is crude simple and reliable. I chose the lmtv because it drives nicer and it has 1 less axle to maintain, I didn't need a second axle, and the cab seals up staying dry and snow free. the choice is yours and what suits you the best. if you get an lmtv with an electronic motor you may find your self seeing cat or the Allison shop to plug in. As for parts I don't know what the other guys are talking about, I maintain a fleet of class 7 trucks, both cat and cummins engines. the parts are expensive for both and there is very little after market support for cummins stuff now days, they are not like the old 855 series engines.
- 3,871
- 497
- 83
- Location
- Gray Court SC
I am for both.
A rugged truck and a comfy truck.
A rugged truck and a comfy truck.
BenRoberts
Certified insane
- 1,367
- 208
- 63
- Location
- southwest/ohio
Honest opinion from me. I bought my 5 ton as a pure toy. I wanted big crude and simple. I wanted the 855. It does what I want it to do. I don't haul or tow. It gets looks and my kids love it and has a cool factor I wanted.
- 1,653
- 1,669
- 113
- Location
- Nova Laboratories, WA
Old post but....
That's EXACTLY what happened on my M934.. LOL.. So, it happens to both..
Jericho
Well-known member
- 1,180
- 69
- 48
- Location
- Landaff NH
You got to run em long enough and hot enough to dry the system out. And keep water out when parked
Chris H
New member
- 64
- 2
- 0
- Location
- California
Are you saying that a M939 won't keep the rain/snow out? Im completely new at this and am interested in both although I'm leaning toward a bobbed 939 because I'm used to and like Cummins.
Jericho
Well-known member
- 1,180
- 69
- 48
- Location
- Landaff NH
No, he s simply stating a fact, the 900 series cabs are just like the m 35 cabs , noisy over bumps , little insulation, ill fitting seams and roof to door top clearance compared to the LMTV , which is more like a modern off the assembly line truck , good seals o the doors , roof ect, I have a 931A2 LIKE it LOTS , but he is right !
Chris H
New member
- 64
- 2
- 0
- Location
- California
Thanks Jericho. Is this something that can be remedied?
74M35A2
Well-known member
- 4,145
- 326
- 83
- Location
- Livonia, MI
The Cat 3116/3126 engines are not home run hitters in reliability.
Chris H
New member
- 64
- 2
- 0
- Location
- California
Funny,
I talked to Brad Ponci about them yesterday and he said he considers them throwaways. My local mechanic said they're good but you have to have their tools to work on them.
74M35A2
Well-known member
- 4,145
- 326
- 83
- Location
- Livonia, MI
People are quick to get excited about yellow Cat stuff. If they were good, your local mechanic would not have to have the tools to work on them.
Jericho
Well-known member
- 1,180
- 69
- 48
- Location
- Landaff NH
Within reason, it is what it is, ensure your door seals are serviceable , seal the gaps , I use black silicone RTV. The 900 is quieter than my M 109 by far, Heater works good, pwr steering, SUPER brakes, ABS , Cits , when you have it working . I like it, I have been in LMTVs , they are nice, TOP END is much lower than the 931A2 , I just shift into top gear at 50/55 and it jumps to 65 plus real easy , Lmtvs are thought to be slower, Engine HUM , not really in to the cat 3116, but an engine is an engine, maintained it should last until your done with it, I like CATS but a lot of their 4 cylinder stuff isn't even cat anymore