Looking for info on the fill pipe for the master cylinder

[PaFarmer]

I am planning to put a remote reservoir on my brake system If I can’t find a fill pipe. I rigged up the same on my M35A2. My M211 does not have a fill pipe on the master cylinder. The cap for the master has 1.25” threads and no shoulder, so it can be run in too far and drops into the master cylinder. I had a spare master cylinder cap for an M35A2 so I used it, but I would like to install the fill pipe or use a 1.25” threaded pipe as the extension, but need the correct thread pitch. Any pics of an original, leads on an original or know the proper thread pitch?

 

[USMC 00-08]

I have this. Let me soak it in oil for a few days and see if it will break loose or even be a good part.

 

[frank8003]

Now you got me goin thru 1.6GB of
files just to show you how it should be done
Should I post?

 

[PaFarmer]

I have this. Let me soak it in oil for a few days and see if it will break loose or even be a good part.

View attachment 813116

Thanks For the pic and please let me know if you can get it loose.

 

[PaFarmer]

Now you got me goin thru 1.6GB of
files just to show you how it should be done
Should I post?

Thanks for hunting. Seeing what it looks like helps. Interested in buying one or I’ll need to rig up the remote.

 

[frank8003]

JUst make one

 

[PaFarmer]

JUst make one

As I said in the first post, I put a remove reservoir on my M35A2, that wasn’t the question. USMC 00-08 posted the pic I asked for. Id like an extension, if I can get one. If not I have the reservoir bottle and hose ready to go.

 

[USMC 00-08]

I got the pieces broke loose with a little help holding it. They've been together a while.



I think they will clean up fine if you have a way to bead blast it or can wire wheel it inside and out. Let me know if you want to mess with this..

 

[nchittendon]

That's cool. I've never seen that extension filler pipe before. Does it put the cap right at the floor pan, or just under the hatch?

 

[lucydeuce]

That's cool. I've never seen that extension filler pipe before. Does it put the cap right at the floor pan, or just under the hatch?

Yes mine is that way puts it about a quarter inch below the hatch in floor took me forever to figure out where to put brake fluid when i got the truck home all i could see was the banjo bolt and brake hose. made my wife work brake pedal and i followed the linkage to the master cylinder