Looking for MEP-831A Schematics

[AfghanVeteran2010]

Title pretty much sums it up, I'm looking for MEP-831A Schematics that I can actually see. I have looked in the TM 9-6115-639-13&P in back where schematics are. When I zoom in to get a closer look, I cant read it. I have tried Google it, it just pulls the TM up. I have also checked the TM section on this forum.

Any ideas where I can look?


Example of zoomed schematic

 

[AfghanVeteran2010]

Found schematics in a training slide, these will have to do for now. Was hoping for one page schematic that could be printed off on a large printer.

https://www.steelsoldiers.com/showthread.php?164142-MEP-831A-training-presentation-with-schematics

 

[DieselAddict]

Its on my list to restore those as well. I've not had time to work on it yet.

 

[kloppk]

The schematic in the TM 13&P dated 15 August 2005 has real clear schematics. Get you hands on a copy of that version.
If you can't locate it just PM me your email address and I'll send you a copy of it.
Here is a zoom in on the 2005 version..




The newer 13&P dated 30 April 2010 has lousy, fuzzy schematics.
Here is a zoom in on the 2010 version..

 

[Guyfang]

Why don't you simply put the 2005 extracted schematics into the TM forum? Had someone told me that the schmatics sucked, I would have taken care of that before.

 

[AfghanVeteran2010]

Thank you Kloppk

 

[AfghanVeteran2010]

I will extract .pdf schematics here, I do not have post permissions for the TM section.

 

[Guyfang]

I will extract .pdf schematics here, I do not have post permissions for the TM section.

Why don't you have permission? You sure?

 

[AfghanVeteran2010]

MEP-831A Schematics, If I missed anything please let me know.


View attachment MEP-831A - Schematics.pdf

 

[AfghanVeteran2010]

Why don't you have permission? You sure?

This is from TM section.

[h=4]Posting Permissions[/h]

• You may not post new threads
• You may not post replies
• You may not post attachments
• You may not edit your posts

 

[Guyfang]

I looked through the 2010 schematics, and found no changes from the 2005 schematic. How could I do that so fast? Well, the finger above, normally tells you when something has been changed in a schematic. It points to what ever has been changed. Simple way to see whats been changed.

For changed text in the manual, it looks like this. A thick dark vertical line, to the left or right of the text changed. I hope you can see this. Nothing seems to work right tonight.

View attachment Scan_0001.pdf

 

[Guyfang]

This is from TM section.

Posting Permissions

• You may not post new threads
• You may not post replies
• You may not post attachments
• You may not edit your posts

Did you go to TM upload section? Its one above the Generator TM forum. You have to use the upload section, and someone, a moderator, will review it and hopefully post it where it belongs. Try it.