- 6,426
- 4,985
- 113
- Location
- Ft. Lauderdale, Florida
.. 40 MPH topped at 3000 RPM . I have it bobbed and 48 inch tire!! Help ![/QUOTE]
You have the new engine ready to put in?
You have the new engine ready to put in?
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Low on power, need assistance please.
- Thread starter Sullivankyle7
- Start date
- 7,409
- 2,503
- 113
- Location
- Interlachen Fl.
Did you shift to High range?
steelandcanvas
Well-known member
- 6,187
- 85
- 48
- Location
- Southwestern Idaho
I think downloading an Operator's Manual might be a good course of action here.
FarmerRob
Member
- 151
- 2
- 18
- Location
- Chandler, TX
sandcobra164
Well-known member
- 2,999
- 295
- 83
- Location
- Leesburg, GA
Back to the original poster, It should rev fairly freely in 1-3 when you stomp on the throttle. 4th should hold till about 40 mph and 5th takes a little while to get to 55 indicated. That's how mine rolls and it's on 11's. I've turned the fuel up using advice on here but do not have a pyro yet. I've run it this way for about 5 years and it's hauled many heavy loads. Heaviest being an MK-18 trailer. That particular trip was a tad slow but I could still get to 5th gear and hold it on the flats through mild hills.
