-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
LSSV Owners, post info and pictures of your truck.
- Thread starter Stonepicker1
- Start date
If you want to start a new thread and list modifications that can be done to the Duramax, that would be a wonderful idea. I know many other sites have that information but I don't frequent them.
roadkill150
Member
- 45
- 2
- 8
- Location
- North Coast, CA
A quick picture of the 2002 rear bumper. Blackouts are integrated as is the NATO plug. I plan to add a 7 pin as well.
Stonepicker1
Well-known member
- 2,446
- 86
- 48
- Location
- Coconut Creek, Florida
I tried to see if the 37" HMMWV tires would work, but they are just to big.
i have BFG 35x12.50Rx17 load range D on it now with a little rub at full turns. The front tires are shot. I could just replace the fronts at $350 each and get an alignment, but I want a better over the road tire.
I looked at some BFG 305x65Rx17 with load range E. Price at $285 each. They are a little shorter at 32.4", but better of every day driving on the road.
Anyone running a good highway tire that will last?
i have BFG 35x12.50Rx17 load range D on it now with a little rub at full turns. The front tires are shot. I could just replace the fronts at $350 each and get an alignment, but I want a better over the road tire.
I looked at some BFG 305x65Rx17 with load range E. Price at $285 each. They are a little shorter at 32.4", but better of every day driving on the road.
Anyone running a good highway tire that will last?
Attachments
Stonepicker1
Well-known member
- 2,446
- 86
- 48
- Location
- Coconut Creek, Florida
I also have a set of Hutchinson beadlock 16" rims. They have 39" tires on them now, but was looking at maybe going with 305x70rx16E. That would be a 33" tire.
I know the rims are not for the highway and would have to mount the tires myself.
I know the rims are not for the highway and would have to mount the tires myself.
Attachments
dstang97
Well-known member
- 1,859
- 30
- 48
- Location
- Clover, SC
You can still get 33" and 35" bfgs in a 16.5 tire. That would be nice with 24 bolts or 12 bolts.
On a side note if any of you guys sell a lssv you better contact me first.
On a side note if any of you guys sell a lssv you better contact me first.
- 900
- 168
- 43
- Location
- Las Vegas Nevada
I'll have a Lssv some day just you wait and see PIFFT! 
nice trucks all maybe my boss would sell me the truck I drive 07 chevy Silverado classic 3500 4 door 4x4 non dully paint it green and make the bumbers up .
nice trucks all maybe my boss would sell me the truck I drive 07 chevy Silverado classic 3500 4 door 4x4 non dully paint it green and make the bumbers up .
- 2,894
- 501
- 113
- Location
- Ft. Bragg, NC
On my Ram 2500 I run 35" Nitto Grappler A/Ts. They run find on the highway, some noise but the engine covers that. They do rub at full turn on my truck. I'm running stock factory aluminum rims and the tires with no additional spacing. They are pretty much worn out and I will be replacing them with another set of the same.
roadkill150
Member
- 45
- 2
- 8
- Location
- North Coast, CA
I figured I'd throw a shot of my lssv next to a coworkers stock truck of similar year. 
HASSON1911
Member
- 748
- 24
- 18
- Location
- roseau/mn
Awesome truck, anyone know the frequency of which the lssv come up for sale? If i could find an 08 I'd sell my dd right now! Keep up the good work!
roadkill150
Member
- 45
- 2
- 8
- Location
- North Coast, CA
Pretty rarely to see lssvs in general. I just got lucky when I picked up mine, double luck that it wasn't hammered like several that have made it to the auction block.
HASSON1911
Member
- 748
- 24
- 18
- Location
- roseau/mn
That's what I was afraid of, oh well now that I got my hemtt I'll keep a look out. Haha
JP871Racing
New member
- 29
- 1
- 0
- Location
- Forward Twp./PA
New owner of LSSV
I can finally say I'm the proud owner of an 05 LSSV. I purchased it from James (M1075) and I like to say it was a pleasure doing business with him. I love the truck and it will be greatly taken care of! I drove all the way from Pittsburgh, PA in my 85 M1009 down to Oklahoma City to buy this awesome truck! It was a very nice drive down. I had zero problems in my CUCV. Once I got there and I seen the truck, it was very intimidating to look at the first time, but I feel in love with it. The sale was done with ease, hooked my blazer up to the truck with tow bar, safety chain, magnetic towing lights for the CUCV, and back home we go!
I can finally say I'm the proud owner of an 05 LSSV. I purchased it from James (M1075) and I like to say it was a pleasure doing business with him. I love the truck and it will be greatly taken care of! I drove all the way from Pittsburgh, PA in my 85 M1009 down to Oklahoma City to buy this awesome truck! It was a very nice drive down. I had zero problems in my CUCV. Once I got there and I seen the truck, it was very intimidating to look at the first time, but I feel in love with it. The sale was done with ease, hooked my blazer up to the truck with tow bar, safety chain, magnetic towing lights for the CUCV, and back home we go!
Unionjackjim
Member
- 57
- 0
- 6
- Location
- Kent , UK
Hi guys , can anyone help with the battery wiring diagram or link to the TM , I'm struggling , thanks in advance
Attachments
Stonepicker1
Well-known member
- 2,446
- 86
- 48
- Location
- Coconut Creek, Florida
Unionjackjim
Member
- 57
- 0
- 6
- Location
- Kent , UK
Thank you , That is 100% all the info I needed 
HASSON1911
Member
- 748
- 24
- 18
- Location
- roseau/mn
Anyone have interior pic if this truck it specs. It seems very elusive to find any info. Thought if buying a civilian version and doing a conversion what ever that may entail.
Attachments
islandLSSV
New member
- 1
- 0
- 1
- Location
- ya moms
dead thread but my RCLB 06 LSSV with enhanced mobility package.