Lug nut OD size m1009

[tbearatkin]

Just FYI if missing your tire iron the correct size socket for the lug nuts on a M1009 is 19mm. 3/4 fits but is loose. 19mm was a snug perfect fit.

I searched for this for an hour on here but could not find the answer I needed

 

[chrisknight_1985]

Thanks for the info. Do you use just a socket or did you have a tire iron made?

 

[tbearatkin]

I have a 3/4 drive 19mm impact socket and use a breaker bar. Thought about getting a tire iron but this works.

 

[Keith_J]

I too discovered this. Also, a 22 mm fits on the 1008/1010/1028/1031 singles. I thought it was 7/8" but 22mm is a better fit.

Thankfully I have a full set of metric impact sockets.

 

[GREENMV]

Never thought about Metric. I have been using 3/4" I will try next time I pull my spacers.

 

[Keith_J]

When you get over about 18mm, most metrics have a decent fit in 6 point sockets. 19 mm is 0.74803", give or take. Less than a sheet of paper difference.