M-1009 driver's side radio rack

[eme411]

does anyone have photos or info on the support legs for the driver's side radio rack,

 

[eme411]

M-1009 driver's side radio rack info and legs

looking for info and support legs for the driver's side radio rack for the M-1009

 

[eme411]

M-1009 radio rack legs

Anyone out there have photos or dimensions on the radio rack legs for the Driver's side radio rack and how the legs mount to the floor

 

[Warthog]

Was there a radio rack on the drivers side? There may be but I have never seen one.

 

[Evil Dr. Porkchop]

I've got the whole kit NOS, I can take measurements of the legs for you in the next day or two.

 

[eme411]

That would be great, thanks

 

[Matt Kahle]

I have a whole kit too, I will take some photos for you.

 

[BostonPatriot28]

I need to get my m1009 comm back up too

 

[Evil Dr. Porkchop]

Leg number 1 is 17 and 3/16s inches, leg number 2 is 10 and 9/16s inches.

 

[mutt1966]

Iam assuming that the small brackets are the mounts for the wheel well could I get their dimensions Ive never saw those before. Thanks, Scott O&O

 

[CARNAC]

I have one nib in GA that mounted a radio in the very back where the water can is usually mounted. I think it was originally made for the MSE. I saw my first one of these mounts in a old CUCV in a junkyard in PA years ago. It had the MSE transmitter mount in it. I later saw one in GA and it had a SINCGARS base mount in it.

 

[Evil Dr. Porkchop]

I will get those for you today or tomorrow.

Iam assuming that the small brackets are the mounts for the wheel well could I get their dimensions Ive never saw those before. Thanks, Scott O&O

 

[eme411]

do any of you guys with the NOS kits have the install paper work with them , I would love to get a copy , I just dug out the ones for the pass side , lots of good info there,

 

[Evil Dr. Porkchop]

Mine has all the paperwork too, I'll try to scan it and post it.

 

[T. Highway]

Subscribed

 

[Evil Dr. Porkchop]

Here's the paperwork:

 

[T. Highway]

Jon,

Thanks for sharing that instruction sheet with us.

Bert

 

[eme411]

outstanding , my plan is to do a full RRB installation, thanks,