I have a 1984 m1008 I'm putting a 350 in and I'm wondering and I'm wondering about the wiring harness I have the original wiring harness that came with the 350 which is a 79 model k20 engine but what I want to know is will the boss plug on the fire wall fit my gas engine harness the plugs are shaped the same i just want to know if everything will work like starting the motor and the alt charging? Please I need some help with this
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
M1008 350 swap
- Thread starter Tawman22
- Start date
- 1,836
- 987
- 113
- Location
- Paris KY
Ummmm..... I believe this thread belongs in the CUCV Modification Forum.
- 6,986
- 2,522
- 113
- Location
- Montevideo/Uruguay
Moved.
Barrman
Well-known member
- 5,266
- 1,782
- 113
- Location
- Giddings, Texas
Look at the wiring diagram in the appendix of the -20 TM. It has the pin out for the CUCV part. You need to find the pin out for your engine.