Alucard-HD
New member
- 71
- 0
- 0
- Location
- PA
Ok, first off i'm new to this forum. I looked around a bit and found this be a common issue for these trucks. When i first bought the truck, it had bad plugs and no resistor and i am new to the 6.2s so i had no clue. One day i was driving it on the highway and smoke was pouring out of the dash, and i had no idea what it was. I noiced then i had a bad draw on the batteries. So i looked for new glow plugs, like a moron i put 12v plugs in it well it started right up the first time and that was it, fried. So i bought 24v plugs and they worked great for the first few days and then the truck wouldnt start again. i plug the plugs out and they didnt look bad. later i found i have two cards in this truck. one was right under the wheel and it was a bigger card, and the other was over to the right and it was half the size of the first card, and it was fried to a crisp. so that being said, how hard is it to but a push button in instead of the card? Any help would be great.