So reading around on this forum I see people saying that the exhaust manifolds have 2.5in outlets that go down to 2.25in at the collector.... but that can't be right looking at my M1009 as the bolt centers on the manifold flanges are 2.5in not 3in.... so it must have 2in outlets on the manifold right?
Are 6.5 N/A non turbo manifolds the ones I need to get 2.5in outlets? What am I missing? The intention is to buy premade downpipes that match and weld up my own exhaust and resonators etc...
From what I see I also need to make sure I don't get the HMMWV manifolds as the outlets on those are set too far back.
Are 6.5 N/A non turbo manifolds the ones I need to get 2.5in outlets? What am I missing? The intention is to buy premade downpipes that match and weld up my own exhaust and resonators etc...
From what I see I also need to make sure I don't get the HMMWV manifolds as the outlets on those are set too far back.