M1009 Blower Motor Housing

[GunnyM1009]

Anyone know where to get a new blower motor housing at. The metal housing that's in the engine bay. The lower part of mine has rusted out and I'm not finding any on the Google.

 

[GunnyM1009]

No luck finding anything. Guess I'll pull it and cut the rust out and fiberglass patch it. Not ideal but it should work.

 

[cucvrus]

No luck finding anything. Guess I'll pull it and cut the rust out and fiberglass patch it. Not ideal but it should work.

I have one. Send me a PM. That's an easy part to come by.

 

[cucvrus]

I can't post pictures in the PM so here you go. been in storage for 20 years so it will clean up like new and fulfill your needs. A little cleaning and some paint and it is just like Day 1. OEM GM used part.

There is no rust thru and really only dirty. I was on the second floor of the barn and it was 100* I didn't notice the auto focus was not in focus. I was up , found it, Took the picture, and back down.

 

[M1009_SPAIN]

THR big CUCVRUS!!!!!!

 

[GunnyM1009]

Got it in CUCVRUS appreciate it. Now just have to wait for the 16ga sheet metal to get here to patch the firewall and put it back together. Thanks again.

 

[cucvrus]

If I had know I would have sent a Genuine piece of GM sheet metal along. I didn't know.

 

[GunnyM1009]

If I had know I would have sent a Genuine piece of GM sheet metal along. I didn't know.

No worries man it's about 6 inches of rust along the bottom of where the housing mounts up. Just going to cut it out and weld in a new piece.