cucvrus
Well-known member
- 11,388
- 10,076
- 113
- Location
- Jonestown Pennsylvania
It is not a bad job. Or should I say it has not been bad for me the last 3 sets I changed. I have been using the Dorman lines and have had great success and have been able to change them on and off in about 1 - 1 1/2 hours. The clamp and all start to finish. Tip is if you can get the clamp bracket loose on the exhaust manifold studs get every thing started hand tight and tighten and align as you go. Take your time and wear safety glasses. Good Luck. I see the oily leakers in the picture.