M1009 front frame side shackle bushings

[AOR]

Can someone please help me find front upper shackle bushings that go into the frame for an m1009 Blazer 1984 model. We have ordered several and they have all been wrong.
This one uses 7/16 bolts. We have been ordering for the civilian K5 Blazer. Is there another civilian application that may fit this such as a 2500 or suburban etc? The TM shows a part in the diagram as #13 but there is no part number given for #13 and it’s hard for me to read when only having access to a cell. Is there a company that specializes in selling CUCV parts? I have been striking out. Thank You

 

[Barrman]

Is this the one for the rear of the front shackle? Off Road Design has a very stout bushing, surround and hanger kit. I went with that instead of the very flimsy stock parts.

 

[AOR]

Is this the one for the rear of the front shackle? Off Road Design has a very stout bushing, surround and hanger kit. I went with that instead of the very flimsy stock parts.

It’s for the front at the rear of the front spring that go in the frame the ones we removed are whopped

 

[Barrman]

Yes, check out the ORD part. I put them on my Cowdog suburban and have had 35,000 miles trouble free ever since. I will make them part of any suspension work on the M1009’s as well.

 

[nyoffroad]

I walked into NAPA and they had them in stock.

 

[AOR]

I walked into NAPA and they had them in stock.

we ordered multiple choices from Napa and the one that matched based on specs the sleeve pocket was to loose to be acceptable. Please share the part number if you still have it

 

[nyoffroad]

we ordered multiple choices from Napa and the one that matched based on specs the sleeve pocket was to loose to be acceptable. Please share the part number if you still have it

Sorry but it was long ago and my memory is like a sieve!