vanaisa
Well-known member
- 258
- 348
- 63
- Location
- Tallinn, Estonia
Are they same on 1008 and 1009?
Left 1008 - is it fits to 1009?
Left 1008 - is it fits to 1009?
![](https://www.globeworks.eu/media/image/product/171/lg/vorderrohr-links-chevy-62d-pick-up.jpg)
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
I just did the exhaust on my one 1009 and the kit I got fit both the truck and the blazer. Passenger side will need cut down as it is to long and hits the transfer case. If you don't have a welder then it can be very difficult to get exhaust to fit. Measure the downpipe drop and see if it is the same as the one you have.Are they same on 1008 and 1009?
Left 1008 - is it fits to 1009?
![]()
Oh geez!!! I am not sure if I'd try it unless it is super cheap!! The kit I got is from Dynomax Part number 89006 Not sure if you can get this out there but it's a start.Thanks.
Thing is, seller is in Germany and I am in Estonia.So can not measure anything.
My welder friend will massage pipe, if needed.
I just do not want to build this zig-zag front pipe from different bendy parts. Thats why i prefer order whole part.
From there everything is simple, we fabricate it easily.
Can you get the part from Dynomax there? Not from summit?passenger side, as advertised in german seller - this IS way too long.
By his description should fit "Chevy K30 M1008 K5 M1009"
![]()
That is, what you mean must cut down?
Yeah, shipping from US is more expensive, than part itself (Summit etc.)
Dang is there an exhaust shop that can bend one up?Nope.