M1009/M1008 front exhaust pipes (from manifolds).

[vanaisa]

Are they same on 1008 and 1009?

Left 1008 - is it fits to 1009?

 

[WWRD99]

Are they same on 1008 and 1009?

Left 1008 - is it fits to 1009?

I just did the exhaust on my one 1009 and the kit I got fit both the truck and the blazer. Passenger side will need cut down as it is to long and hits the transfer case. If you don't have a welder then it can be very difficult to get exhaust to fit. Measure the downpipe drop and see if it is the same as the one you have.

 

[vanaisa]

Thanks.


Thing is, seller is in Germany and I am in Estonia. So can not measure anything.
My welder friend will massage pipe, if needed.
I just do not want to build this zig-zag front pipe from different bendy parts. Thats why i prefer order whole part.
From there everything is simple, we fabricate it easily.

 

[WWRD99]

Thanks.


Thing is, seller is in Germany and I am in Estonia. So can not measure anything.
My welder friend will massage pipe, if needed.
I just do not want to build this zig-zag front pipe from different bendy parts. Thats why i prefer order whole part.
From there everything is simple, we fabricate it easily.

Oh geez!!! I am not sure if I'd try it unless it is super cheap!! The kit I got is from Dynomax Part number 89006 Not sure if you can get this out there but it's a start.

 

[vanaisa]

passenger side, as advertised in german seller - this IS way too long.

By his description should fit "Chevy K30 M1008 K5 M1009"

That is, what you mean must cut down?

Yeah, shipping from US is more expensive, than part itself (Summit etc.)

 

[WWRD99]

passenger side, as advertised in german seller - this IS way too long.

By his description should fit "Chevy K30 M1008 K5 M1009"

That is, what you mean must cut down?

Yeah, shipping from US is more expensive, than part itself (Summit etc.)

Can you get the part from Dynomax there? Not from summit?

 

[vanaisa]

Nope.

 

[WWRD99]

Nope.

Dang is there an exhaust shop that can bend one up?

 

[vanaisa]

not small ones. Only those, who make hundreds. Or one, but price is same as hundred pieces

I try those German ones, and inform here, how it goes.

Bodyworks are almost ended, so i need this exhaust soon.
In brighter side - i got new windshield from here and price was 60eur It was waiting me in one warehouse some 7 years...

 

[vanaisa]

"Oh, they are practically straight", he says.


Well, exhaust is apparently already done.
We´ll see in monday. Damn, what a turn...

 

[vanaisa]

well, got my Blaazik home today. Exhaust is made from multiple bend parts. Pure pornography.

Bodywork is OK, just need to paint again those brown and black parts...