Paddyofurniture
Member
- 40
- 0
- 6
- Location
- Asheboro, NC
Is there a serial number on a M101 frame?
If so where is it?
Paddyofurniture
If so where is it?
Paddyofurniture
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
M101 frame numbers?
- Thread starter Paddyofurniture
- Start date
yellowrubicon
New member
- 43
- 2
- 0
- Location
- Montpelier, VA
Should be stamped on a black plate somewhere on either side of the tongue.
Paddyofurniture
Member
- 40
- 0
- 6
- Location
- Asheboro, NC
I have a black data plate on the M101 trailer body but no data plate on the trailer tongue.
Paddyofurniture
Paddyofurniture
Wolf.Dose
Active member
- 1,062
- 9
- 38
- Location
- Boehl-Iggelheim, Germany
I found nothing! So I stamped the number of the data plate into the frame.
Wolf
Wolf
- 8,277
- 617
- 113
- Location
- Corpus Christi, TX
I've always been told "no".
The plate with the serial and reg # were either bolted, rivieted, glued, or welded on depending on when and by who it was mfg
The plate with the serial and reg # were either bolted, rivieted, glued, or welded on depending on when and by who it was mfg
Wolf.Dose
Active member
- 1,062
- 9
- 38
- Location
- Boehl-Iggelheim, Germany
How to weld an aluminum plate to a steel tounge? Please explain that. As an engineer for me that is impossible!
Wolf
Soildering is under special cirumstances possible.
Wolf
Soildering is under special cirumstances possible.
Paddyofurniture
Member
- 40
- 0
- 6
- Location
- Asheboro, NC
On my trailer the aluminum plate is attached to the steel body with steel solid rivets.
Paddyofurniture
Paddyofurniture