Good afternoon, I am trying to troubleshoot a starting issue with a M1031. I have 23.2 volts at the glow plug relay and on the purple wire of the Doghead Relay with the key off. When I turn the key on, I get lights. After the Wait light goes out, I turn the key to start position and the Doghead relay clicks fast, but the starter does not turn over. Where should I look next? Thanks for the assistance.
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
M1031 Starting issue
- Thread starter 469Ecdr
- Start date
- 1,368
- 950
- 113
- Location
- State College, PA
Sounds like a dead battery or dead batteries. 23.2 volts before starting sounds low.
Check the voltage on each battery when trying to start the truck. One or both are low.
Check the voltage on each battery when trying to start the truck. One or both are low.