• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

M135 spit'n and sputter'n

ncduece

Member
138
1
18
Location
wilmington nc
one other note if the plugs are black they will show a spark out of the engine but alot of times will not fire when placed back in the engine, a note about the compression test, the gauges come with a check valve in them so the leaking down is a gauge problem, also open the throttle when doing the test.
 

butch atkins

New member
398
3
0
Location
Fountain Inn SC
looking thru the TM 9-1826D about the fuel level in the bowl,you said he had it at 3/4 inch below bowl surface,the TM says 1/2 +- 1/32 for fuel level in bowl,needs to raise fuel level,hope this helps,again,CHECK the plugs to see if it is running to rich,black sooty plugs,hope this helps,good luck
 
Top