irnworker433
Active member
- 51
- 172
- 33
- Location
- fleischmanns ny
I appreciate it Mullaney!! We weld alot of aluminum snowmaking equipment at work. Lots o practice. Means alot man thank you and the others.
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
M201b1 1962 revival.
- Thread starter irnworker433
- Start date
irnworker433
Active member
- 51
- 172
- 33
- Location
- fleischmanns ny
So I finally have the winch all buttoned up...Whatta chore!! Feels good to fix something that was barely salvageable and needed alotta love!! It was a bitch getting the holes all back aligned aftyer it all was ripped apart by a huge tree.. Fender repairs underway also... One thing at a time;...... getting the winch fixed was a biggie..Next is getting the front fenders done.. Just rebuilt all the wheel cylinders this week also....Need to bleed.. Thanks for all the advise..it is truly appreciated..
Attachments
- 3,800
- 2,828
- 113
- Location
- Peoria, Illinois
Darn impressive! Hat's off to ya!
irnworker433
Active member
- 51
- 172
- 33
- Location
- fleischmanns ny
Drivers fender nearly complete. Disclaimer this is my first attempt at body work. Both fenders were rusted out the same. All rust was cut out and replaced. Will try to do better w the passenger fender.
Attachments
Canadianz
Member
- 34
- 74
- 18
- Location
- Ontario, Canada
Nice work! It would be looking a little out of place if it was perfect... so I would say it’s a 10/10 for a 70year old military truck.
- 3,800
- 2,828
- 113
- Location
- Peoria, Illinois
Heck fire!! What in the blazes did you do "wrong" for goodness sake???? I got a deuce you can "practice" on!!!! WOW!
- 7,716
- 19,766
- 113
- Location
- Charlotte NC
.
I was pretty impressed with @irnworker433 's work too. Don't know what it might look like under the top of that fender - but to me it looked as good as brand new!
irnworker433
Active member
- 51
- 172
- 33
- Location
- fleischmanns ny
Thanks again guys. The underside came out like the top. I’ll take a pic and post. I was thinking the same thing not to make it too good to match the rest of the truck. Doing bodywork isn’t as bad as I thought even w all the rust
Marchplumber bring that deuce on over and bring beverages. We’ll hook you up!!. I have the lights semi attached. So I didn’t have to drill more holes in fender I made one bracket to hold both the blackout lights from the side panel. Happy Friday guys!!
Marchplumber bring that deuce on over and bring beverages. We’ll hook you up!!. I have the lights semi attached. So I didn’t have to drill more holes in fender I made one bracket to hold both the blackout lights from the side panel. Happy Friday guys!!
Attachments
- 3,800
- 2,828
- 113
- Location
- Peoria, Illinois
How are things moving along??? Started the new body shop/winch repair shop yet?? Just checking, ya know....
irnworker433
Active member
- 51
- 172
- 33
- Location
- fleischmanns ny
We’ll Marchplumber thanks for askin!! Actually the last month or so I’ve just been able to finish up the drivers front fender repair and I think I have the brakes figgered out. Lost my father a few weeks ago and I was in CA. taking care of family stuff. I’m also ripping the carpet in my house and putting hardwood floors in. So my plate runneth over. I appreciate you asking and I’ll make sure to post more as soon as I start back up. Peace!
- 3,800
- 2,828
- 113
- Location
- Peoria, Illinois
Sorry about your Pops! May he rest in peace with the Lord!! What's a few more irons in the fire for an ironworker?!?! LMBO.....
- 7,716
- 19,766
- 113
- Location
- Charlotte NC
.
Sad to hear about your dad.
He is resting peacefully now, watching you and your projects.
.
irnworker433
Active member
- 51
- 172
- 33
- Location
- fleischmanns ny
Dad was a tough ole Marine. Hoo raaa! His happy place was being in the deserts southwest racing dirt bikes and off road cars. I’ll be putting his name somewhere on my truck. Thanks gents for condolences.
irnworker433
Active member
- 51
- 172
- 33
- Location
- fleischmanns ny
Heres a shot after putting on new shoes. The only progress in a bit. A pricey one at that.. Im not sure itll be on the road this summer..Still too much to do and spend to make it streetable. Patience is not my virtue.
Attachments
- 3,800
- 2,828
- 113
- Location
- Peoria, Illinois
Patience?? Is there such a thing??
Shoes look good on her....
You're attention to detail is an admirable quality......as is your patience.......
Keep the updates coming.....
irnworker433
Active member
- 51
- 172
- 33
- Location
- fleischmanns ny
Both front fenders buttoned up, addressing the hood is next. It has a good whack in the front. The truck was missing all blackout lights. Installed those and made brackets so they arent attached to fender anymore. Less holes in it the better? The front grill was missing also. Decided to fab another, its a little different than original but its beefier and looks pretty close.. Starting to get into the fuel system front to back. It runs for a few seconds then quits. Using gas can on fender trick. Those kinds of things are out of my comfort zone. Not a mechanic at all. I shall do my best!! Progress.. One pic is the underside of fender.
Attachments
irnworker433
Active member
- 51
- 172
- 33
- Location
- fleischmanns ny
Both front fenders buttoned up, addressing the hood is next. It has a good whack in the front. The truck was missing all blackout lights. Installed those and made brackets so they arent attached to fender anymore. Less holes in it the better? The front grill was missing also. Had to fab another, its a little different than original but its beefier and looks pretty close.. Starting to get into the fuel system front to back. It runs for a few seconds then quits. Using gas can on fender trick. Those kinds of things are out of my comfort zone. Not a mechanic at all. I shall do my best!! Progress..
- 7,716
- 19,766
- 113
- Location
- Charlotte NC
.
I know welding isn't normally talked about like guys would normally talk about a woman - but DANG!
That really is some gorgeous metal working. That grill is nicely made too.
Keep us posted with your progress.
It sure looks mighty fine to me!
irnworker433
Active member
- 51
- 172
- 33
- Location
- fleischmanns ny
Thanks A bunch Mullaney! I was hoping to drive it at least once this summer but that ain’t happening. Gosh dang stuff is expensive these days. Tires wiped out my budget for a while. But fixing rust is free!! It is registered insured now. It was a bit of a hassle but a cpl trips to dmv and all is well!