M35a2 and M105 trailer from Dallas to Houston

[sidel2426]

I need to get my m35a2 and trailer from duncanville, TX to Houston. It's currently on my in-laws property so I'm not in a big hurry. I'm hoping someone could get it on a back haul. The truck runs and drives fine so no winch needed for loading. I was offered the use of a tow bar by another member if someone has another truck that could tow it. If anyone can help or point me in the right direction please let me.

 

[doghead]

250 miles is a nice days drive.

 

[3dAngus]

Why not just ride down there in your motorcycle and drive it back with the motorcycle in the trailer?
Could be done in one day.

 

[fuzzytoaster]

You might as well drive it down there and ride your bike back.

 

[sidel2426]

My oil pan has a small hole in it plus a lot of the tires have dry rot. Most people on here recommend not driving them until everything can be checked out. I don't live in Dallas so my time is very limited to work on it. I figure it would be best to transport it.

 

[3dAngus]

If tires are that bad, you sure as heck don't want a friend to dead tow it. It need be carried if you won't drive it. About $3 per mile. Sorry, but true.

Also, have you got a new oil pan and gasket yet? It might be a good idea to have it ready in case someone looks at it over there and elects to drive it for you. If it were me, I would like to have that option upon inspection. Good luck. I hope it works out for ya.