glcaines
Well-known member
- 3,914
- 2,593
- 113
- Location
- Hiawassee, Georgia
I picked up an M66 ring mount at the Georgia Rally two years ago and just now got around to installing it on my M35A3. I sandblasted the three legs and primed and painted them. Then I discovered I had a problem. I should have measured the legs before I started, but they looked like they were a proper length. The right front leg is too long. This is not a problem that the sawzall won't handle. Unfortunately, the two rear legs are too short. I need to know the proper length of the three legs. The TM says 61 - 63 inches is correct for the right front leg, but doesn't mention the two rear legs. I need to know the length of all three legs measured from the bottom of the horizontal arms. I'll pick up some schedule 80 pipe and weld extensions on the two short legs once I know the proper length.