monstertruck287
New member
- 16
- 0
- 1
- Location
- bellefonte pennsylvania
![813 winch 1.jpg 813 winch 1.jpg](https://www.steelsoldiers.com/data/attachments/335/335763-b842c783451f6c1b1c90528775bb9858.jpg)
![m813 winch.jpg m813 winch.jpg](https://www.steelsoldiers.com/data/attachments/335/335762-94bcd67ee249d42829ca16af8f552dfd.jpg)
![m813 rad.jpg m813 rad.jpg](https://www.steelsoldiers.com/data/attachments/335/335761-2d7eb978a28d1ab36d9c5ad9ed49b354.jpg)
I installed this winch about a month ago and this gap was not there at all until I used it the first time. The cable got wedged between the roller and I couldn't get it out. At the time I was stuck and had no choice but to keep winching to get out. Well then the cable snapped at the roller and took out my radiator. After that i was able to use the remaining cable to finish pulling myself out. Anybody know how I can fix this problem? I tried searching and reading TMs for a couple hours now and I am at a loss as what to do. Also want to ad that it was an almost perfectly straight on pull, not off to the side.