• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

M818 Alternator question

USMC4302

New member
137
0
0
Location
So. MD
We have an M818 here (um, very NOT running ...) and it has an alternator on it that checks out to be outputting 14 volts and 140 amps. Is that correct or did somebody try to convert the truck to 12 volts?

Thanks
 

73m819

Rock = older than dirt , GA. MAFIA , Dirty
Steel Soldiers Supporter
In Memorial
12,195
325
0
Location
gainesville, ga.
We have an M818 here (um, very NOT running ...) and it has an alternator on it that checks out to be outputting 14 volts and 140 amps. Is that correct or did somebody try to convert the truck to 12 volts?

Thanks
Should be about 26 volts, 60 amps
 

Tow4

Well-known member
Steel Soldiers Supporter
2,096
646
113
Location
Orlando, FL
How many batteries in the truck and how are they wired? That will tell you if it's 12 or 24 volts.
 

sandcobra164

Well-known member
2,999
295
83
Location
Leesburg, GA
Starter motor will tell the OP as well as the battery wiring. In series would indicate 24V, parallel would indicate 12V. Many of the M818 trucks went on the market years ago and have been through some changes. I say if it is putting out 140 amps at 14V, the truck probably does not have working lights or else those have been changed as well.
 

USMC4302

New member
137
0
0
Location
So. MD
The truck is completely disassembled (and actually looks like a crash site -- parts scattered everywhere), engine was off to the side with all wiring cut and removed, so no way to know how it was wired. The 4 batteries (Hawkers) were still in their boxes, but not wired. Assuming 24 volt, though

Sorry -- didn't mean to make this difficult. Assuming the truck was in original configuration otherwise, is the 12 volt alternator something we should expect to find, or is it not?
 

swbradley1

Modertator
Staff member
Super Moderator
Steel Soldiers Supporter
14,258
1,759
113
Location
Dayton, OH
Sorry -- didn't mean to make this difficult. Assuming the truck was in original configuration otherwise, is the 12 volt alternator something we should expect to find, or is it not?
No, the 12V alternator is not something you should expect, it is normally 28V at 60A.



I want pics of the "crash site". ;-)
 

USMC4302

New member
137
0
0
Location
So. MD
Thank you!

Crash scene investigation imagery is located here. Initial investigation and eyewitness statements indicate a possibility that the M818 involved had a catastrophic "encounter" with an oxy-acetylene device and a collection of various wrenches. The investigation is ongoing and any discussion of causation or contributing factors would be purely speculatory and premature at this time. Further information may be released and made public as the situation develops and warrants.

http://s160.photobucket.com/user/stovebltr/library/Milliman/5 ton/M-809 series parts
 

swbradley1

Modertator
Staff member
Super Moderator
Steel Soldiers Supporter
14,258
1,759
113
Location
Dayton, OH
One heck of a crash scene.

Parting out or trying to put it back together?
 

74M35A2

Well-known member
4,145
330
83
Location
Livonia, MI
If you measured 14v, it is a 12v alternator. That is all there is too it, as long as you measured voltage off the main B+ stud terminal of it.
 
Top