kstate90
New member
- 52
- 0
- 0
- Location
- Miltonvale, KS
I was working on the trailer lights on my M871 trailer last night and I can't figure out how the brake lights are supposed to work. On the back of the trailer there are two junction boxes. The one on the right has the right and left turn wires and the tail and clearance lights hooked up. It also has a stop light wire that comes from the front of the trailer but has no wire that continues on from that post. Everything works but the brake lights. Do they not use a brake light on these trailers? I checked the stop light lug and it engergizes when the brake is applied so I have 12 volts to that point. I am not sure where it needs to go from there. I am trying to stay with the original military style lights but if I can't figure this out I may have to put regular lights on. Thanks.
Edit: I finally found a diagram and it says that the two round lights on the back are the stop/turn lights. On my trailer the turn signals are the two military style lights. I will look at these lights tonight and see what they look like.
Edit: I finally found a diagram and it says that the two round lights on the back are the stop/turn lights. On my trailer the turn signals are the two military style lights. I will look at these lights tonight and see what they look like.
Last edited: