• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

M880 running problems

RichM882

Member
101
0
16
Location
Leeds, England
Hi all. My M882 ran beautifully until about a month ago. The temperature is abnormally high in the UK at the moment but not by US climate levels.
She is BAD starting and cutting out at road junctions. I am suspecting vapour lock in the carburettor and considering fitting an electric pump. lI have a lot of shows coming up and a few miles to drive so I realy need to sort her out. Has anybody had the same problem ?
 

NDT

Well-known member
Steel Soldiers Supporter
10,458
6,532
113
Location
Camp Wood/LC, TX
I never had vapor lock problems here in hot Texas. I would start with the known issues: Holes rusted in the tank pickup tube, issues with the ignition resistor, bad ignition module.
 

N1265

Active member
1,000
5
38
Location
Fremont, Ohio
I agree with NDT, I have never had a vapor lock issue. After checking the ignition ,I would check for a vaccume leak starting with the carb mounting bolts. ( seems like I always have to snug them up )
 

snowtrac nome

Well-known member
1,674
139
63
Location
western alaska
Remember those had a crossover port in intake manifold to prevent wetted walls and operate the choke properly those ports were known to get plugged with carbon and cause all kinds of idle problems especially when the engine was cold. also I don't know what your truck has for milage the original equipment timing chain had a plastic gear that would wear out fast. if your timing light is jumping around suspect a need for a timing chain.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks