• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

M920 Vin location on the Frame?

Hammer

Well-known member
1,483
398
83
Location
Winlock, WA
OK, I have two M920 trucks that I cannot find the VIN location on the frame.
I obviously see it on the driver side door's data plates, but no where on the frame.
One was rebuilt in 1997, the other in 2008.
 

Hammer

Well-known member
1,483
398
83
Location
Winlock, WA
As usual, no help here on this site.
I KNOW where I read one post that said it's about the same as M939 trucks (Simp mentioned this.)
I went out and sanded off the paint in a large patch of the frame in that area, and no luck.

Anyone have a picture of where their VIN was on their 915/916/920?
 

Hammer

Well-known member
1,483
398
83
Location
Winlock, WA
As usual, no help here on this site.
I KNOW where I read one post that said it's about the same as M939 trucks (Simp mentioned this.)
I went out and sanded off the paint in a large patch of the frame in that area, and no luck.

Anyone have a picture of where their VIN was on their 915/916/920?
20200306_141135.jpg
 

Hammer

Well-known member
1,483
398
83
Location
Winlock, WA
Btw, does anyone have a picture of their data plate that shows a manufacture date of their 920 with a VIN number ending in a number larger than 10371?
When they rebuilt the truck, they completely removed the original data plate and put a new plate that only says it was remanufactured 5/8, and the truck was registered as a 2008 truck.
I obviously don't want a 2008 truck, I want to register it as a 1980 truck that it should be.
 
Top