M923a2 no start question

[86m1028]

Any progress on this?

Parts are suppose to be in the mail today !

I will update, probably tomorrow.

 

[86m1028]

WillWagner pretty much nailed it.
Throttle linkage length was used to set idle.
When the pivot on the linkage broke, the ip closed the fuel rail too far = no start.
Once new parts were installed, idle was adjusted with idle stop & linkage was adjusted correctly, it starts & runs fine.
Thanks everyone for your suggestions & help.

Now to to fix the hardtop on my receintly aquired m936A2.
Some idiots installed the hard top upside down.

YES, I'm serious !

 

[Jbulach]

....Now to to fix the hardtop on my receintly aquired m936A2.
Some idiots installed the hard top upside down.

YES, I'm serious !

How dare you tease us with this, without posting pictures!

 

[86m1028]

How dare you tease us with this, without posting pictures!

I've pulled the top off in one piece.
I'll post pics of it tomorrow.
The back piece was installed upside down, so instead of the drip rail diverting water away from the window it channels water INTO the window, inside the cab.
Im really surprised the idiots didn't figure out a way to install the top on backwards.

 

[WillWagner]

Great, glad things were a simple fix and nothing was torn down causing more issues! The hard top will be gravy!

 

[86m1028]

Great, glad things were a simple fix and nothing was torn down causing more issues! The hard top will be gravy!

Yes Will
The top is nothing but a few bolts.
Thanks again for your help on the IP.
That linkage was all jacked up.

 

[Csm Davis]

Deleted