M923A2 Pioneer Tool Rack

[shadowdd]

Pick have been searching for what all is installed in the pioneer tool rack that slides under the bed of a M923A2. Does anyone have pictures do the unit and what all goes on it?

Thanks,
Bryan

 

[goldneagle]

Here is a link to a thread with picture too. http://www.steelsoldiers.com/showthread.php?73871-pioneer-racks

 

[juanprado]

It takes a special shovel just slightly shorter than a commercial one, regular ax, regular pick mattox and handle.

Same rack is used for many years on many trucks.

If you need, I cab take pics of mine on a m923 but I do not have the correct shovel. I just strapped in 2 shorter camper/cat shovels.

 

[shadowdd]

This is great.... I am ready to assemble my pioneer tool kit and Juanprado, that would be great if I could get a picture or two on the truck and off.

Thanks,
Bryan

 

[lindsey97]

subscribed. would love some pics of where to place the tool rack on a m923a1.

 

[juanprado]

It has been a rainy weekend here in New Orleans, it has actually been a very wet year....

Attached are pictures of the pioneer tool rank mounted where the tm calls for on a m923. Mine came off a m931 tractor that had the mud flap tie down kit. The extra angle iron with the 2 footsman loops is part of that kit. I just reused it as it provided 2 extra straps and loops to hold more stuff. I sometime have a short broom on top of the other tools.

Wrench is on one of the bolts I need to loosen to install the hydraulic filter set up on the inside frame as I am working on installing a winch.....

 

[shadowdd]

Thanks for all the info, looks like I know what my next project is!!