EricTheRed
New member
- 7
- 0
- 0
- Location
- USA
Hello everyone,
This is my first post here on SS and I'm in need of some serious help. I've got a great-condition M923A2 and everything work well (including CTIS). Only problem is that since it's been cold here in Wyoming, there have been a few times that it refuses to start. Batteries are good, voltage is good, etc. Occasionally, when I need to start it back up - say, after a dinner drive - it won't even try to crank, i.e., the starter doesn't engage. Lights come on, blower motor works, just no cranking. She starts up fine from dead cold and runs great, but after she's warm, and I cut the engine off, sometimes it's no go. Right now she's dead in the Grocery store parking lot here in Jackson. So, I'm really scratching my head. Any help would be greatly appreciated.
Sincerely,
Eric
This is my first post here on SS and I'm in need of some serious help. I've got a great-condition M923A2 and everything work well (including CTIS). Only problem is that since it's been cold here in Wyoming, there have been a few times that it refuses to start. Batteries are good, voltage is good, etc. Occasionally, when I need to start it back up - say, after a dinner drive - it won't even try to crank, i.e., the starter doesn't engage. Lights come on, blower motor works, just no cranking. She starts up fine from dead cold and runs great, but after she's warm, and I cut the engine off, sometimes it's no go. Right now she's dead in the Grocery store parking lot here in Jackson. So, I'm really scratching my head. Any help would be greatly appreciated.
Sincerely,
Eric