M
MolonLabe2014
Guest
any idea on price?
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
M931/32 2 inch receiver hitch
- Thread starter maccus
- Start date
Hoefler
Active member
- 1,096
- 20
- 38
- Location
- White Bear Lake,MN
$235 to $250 plus you will need to send the receiver tube. If we get a good qty here, price can go lower.
Pete
Pete
I'm not interested in relocating lights. I don't mind drilling holes in the rear crossmember. I also would think that maybe welding the unit directly to the pintle mount would aid in strength. The flat plate that mounts to the rear crossmember just needs to be more narrow. Perhaps use 3/4 plate and narrow the mounting plate would all that would be needed.
Attachments
Last edited:
M
MolonLabe2014
Guest
what length receiver tube will work with this setup? im interested.
goldneagle
Well-known member
- 4,511
- 1,008
- 113
- Location
- Slidell, LA
Removed due to wrong thread.
Last edited:
goldneagle
Well-known member
- 4,511
- 1,008
- 113
- Location
- Slidell, LA
Removed due to wrong thread.
Last edited:
Tornadogt
Member
- 720
- 6
- 18
- Location
- Adkins, Texas
Would it be possible to buy the kit as flat plate and let us weld it together and install our own receiver tube... it might make it easier to ship and remove any liability from the manufacture for it being sold as a Kit??? I like the design and would be interested price was right and if shipping wouldn't kill me.
goldneagle
Well-known member
- 4,511
- 1,008
- 113
- Location
- Slidell, LA
No longer available.
Last edited:
GHall
New member
- 255
- 0
- 0
- Location
- San Antonio/TX
If it'll fit a 931/2, I'm game.. Even with re-mounting the tail lights. Thanks guys!
This thread is titled hitch for 931/932 because of their unique mounting requirements. It might be better if you start another thread for the cargo trucks.
Cobra2401
Member
- 65
- 0
- 6
- Location
- Southtowns,ny
Hey, M35A2-AZ. Where did you get the adjustable draw bar? How many inches does it drop? Thanks. Also do you know what it's rated for?
- 3,222
- 392
- 83
- Location
- Tonopah, AZ
I got it from a trailer supply place here in town. I think it drops in down 10". Also it is rated for 12k.
tm america
Active member
- 2,600
- 24
- 38
- Location
- merrillville in
i got the design all worked out just need a few more measurements..Which i should be getting in the very near future.. It is gonna mount in a very similar way as my m35 rear hitch ..i should have then in production in the next week or so
seano11
Active member
- 878
- 103
- 43
- Location
- Edmonton Canada
Sweet
Ddmk18
Member
- 272
- 2
- 18
- Location
- James Creek PA
Here's what I came up with for a 2 inch style receiver hitch. It's fully welded back side also. 
Attachments
Ddmk18
Member
- 272
- 2
- 18
- Location
- James Creek PA
Does any know why all my pics are sideways.
Tinydragon2001
Member
- 83
- 0
- 6
- Location
- Pahoa/ HI
http://www.etrailer.com/Specialty-Trailer-Hitches/Reese/38124.html I got one of these. Fits good. Got a 2 inch reducer too.
Interapid
New member
- 18
- 0
- 0
- Location
- Florissant, Missouri
Either you are holding your camera on its side or your wife is taking the picture.
Last edited:
jdknech
Active member
- 1,095
- 6
- 38
- Location
- Jeffersonville, Indiana
Is this on a tractor or cargo truck? (the thread is for a tractor because there is much much LESS clearance) and we need pics man!! lol